Shop Gear

Adding the Adaptor Chain frame lock chain to your ABUS frame lock is a way to double your bike’s protection against theft. In the 2.0 version of the chain, the loop ring is additionally covered with a coating to protect it from scratches. The Adaptor Chain 2.0 frame lock chain from ABUS makes it particularly easy to make your bicycle twice as secure: All you have to do is place the chain around a fixed object, pull the end with the lock through the ring on the chain and attach it to the frame lock housing or the Alarmbox 2.0. You will not need another key, nor will you need to lock the shackle separately. Thanks to the special coating on the ring, the paintwork of the bicycle remains protected when it is connected. The Adaptor Chain 2.0 connecting chain fits all ABUS frame locks with additional lock housing as well as the Alarmbox 2.0. - Connection chain with IvyTex textile sleeve to protect against damage to paintwork - Plugs into ABUS frame locks and Alarmbox 2.0 - 6mm square profile chain links made out of hardened steel alloy - Hydrophobic IvyTex cover repels dirt and moisture - Various options for connecting to fixed objects or linking multiple bicycles

- Plugs into ABUS frame locks for additional security - 8mm chain links - Textile sleeve to protect against damage to paintwor

- Compatible with ACH and ACL plug-in chains and cables - Alarm of at least 100 dB for 20 seconds - Alarm function on basis of the ABUS 3D detection system that means that every movement is detected - Intelligent alarm – In case of small and short movement, e. g. the bike gets hit by a football, the lock only gives a short warning tone - Different acoustic signals inform about battery, activation and alarm status

- Wall anchor and two loop chains - 9mm loop chains - Textile sleeve to protect against damage to paintwork. - XPlus Lock Cylinder

The Abbey Bike Tools 4-way precision multi-tool is the perfect choice to carry with you while on a ride. We designed this beautiful green anodized tool to fit into a compact saddle bag, riding wallet, or tuck into a jersey pocket. Everybody makes a multi-tool and there's a little bit of everything on the market, so what's different about ours? All of the little things that add up to one nice little tool. A multi tool is only as good as it's tool engagement so that's where we started. If you're familiar with other Abbey tools you've no doubt noticed that they fit tighter than anything else out there and this one is no different. We use precision stainless steel bits that fit like a glove into the bolts on your modern bike. They wont strip out fasteners like the cheap offshore made tools that are so common in the bike world. They also won't rust into a ugly brown color after a season in a saddle bag. The next part of the multi-tool is the chassis, for this we used our favorite US drawn aluminum alloy and built a 4 position frame to hold the bits. At first glance the tool looks like it might be cumbersome but once you get it in your hand you realize how simple and effective the ergonomics of the tool are. Offering good leverage for all of the small fasteners on your bike, be it the precision adjustment of limit screws or adjusting the handle bars because you had one beer too many when you bolted them down late last night. Available in 5 pre-configured options or fully customizable to fit whatever mix of fasteners your bike requires. We suggest buying a tool for each of your bikes and leaving the tool stored away until needed. These little multi-tools are the result of a collaboration with fellow Bend OR residents, Argonaut Cycles and is the only American manufactured multi-tool for the bicycle market.

The Abbey Bike Tools 4-way precision multi-tool is the perfect choice to carry with you while on a ride. We designed this beautiful green anodized tool to fit into a compact saddle bag, riding wallet, or tuck into a jersey pocket. Everybody makes a multi-tool and there's a little bit of everything on the market, so what's different about ours? All of the little things that add up to one nice little tool. A multi tool is only as good as it's tool engagement so that's where we started. If you're familiar with other Abbey tools you've no doubt noticed that they fit tighter than anything else out there and this one is no different. We use precision stainless steel bits that fit like a glove into the bolts on your modern bike. They wont strip out fasteners like the cheap offshore made tools that are so common in the bike world. They also won't rust into a ugly brown color after a season in a saddle bag. The next part of the multi-tool is the chassis, for this we used our favorite US drawn aluminum alloy and built a 4 position frame to hold the bits. At first glance the tool looks like it might be cumbersome but once you get it in your hand you realize how simple and effective the ergonomics of the tool are. Offering good leverage for all of the small fasteners on your bike, be it the precision adjustment of limit screws or adjusting the handle bars because you had one beer too many when you bolted them down late last night. Available in 5 pre-configured options or fully customizable to fit whatever mix of fasteners your bike requires. We suggest buying a tool for each of your bikes and leaving the tool stored away until needed. These little multi-tools are the result of a collaboration with fellow Bend OR residents, Argonaut Cycles and is the only American manufactured multi-tool for the bicycle market.

The Abbey Bike Tools 4-way precision multi-tool is the perfect choice to carry with you while on a ride. We designed this beautiful green anodized tool to fit into a compact saddle bag, riding wallet, or tuck into a jersey pocket. Everybody makes a multi-tool and there's a little bit of everything on the market, so what's different about ours? All of the little things that add up to one nice little tool. A multi tool is only as good as it's tool engagement so that's where we started. If you're familiar with other Abbey tools you've no doubt noticed that they fit tighter than anything else out there and this one is no different. We use precision stainless steel bits that fit like a glove into the bolts on your modern bike. They wont strip out fasteners like the cheap offshore made tools that are so common in the bike world. They also won't rust into a ugly brown color after a season in a saddle bag. The next part of the multi-tool is the chassis, for this we used our favorite US drawn aluminum alloy and built a 4 position frame to hold the bits. At first glance the tool looks like it might be cumbersome but once you get it in your hand you realize how simple and effective the ergonomics of the tool are. Offering good leverage for all of the small fasteners on your bike, be it the precision adjustment of limit screws or adjusting the handle bars because you had one beer too many when you bolted them down late last night. Available in 5 pre-configured options or fully customizable to fit whatever mix of fasteners your bike requires. We suggest buying a tool for each of your bikes and leaving the tool stored away until needed. These little multi-tools are the result of a collaboration with fellow Bend OR residents, Argonaut Cycles and is the only American manufactured multi-tool for the bicycle market.

The Abbey Bike Tools 4-way precision multi-tool is the perfect choice to carry with you while on a ride. We designed this beautiful green anodized tool to fit into a compact saddle bag, riding wallet, or tuck into a jersey pocket. Everybody makes a multi-tool and there's a little bit of everything on the market, so what's different about ours? All of the little things that add up to one nice little tool. A multi tool is only as good as it's tool engagement so that's where we started. If you're familiar with other Abbey tools you've no doubt noticed that they fit tighter than anything else out there and this one is no different. We use precision stainless steel bits that fit like a glove into the bolts on your modern bike. They wont strip out fasteners like the cheap offshore made tools that are so common in the bike world. They also won't rust into a ugly brown color after a season in a saddle bag. The next part of the multi-tool is the chassis, for this we used our favorite US drawn aluminum alloy and built a 4 position frame to hold the bits. At first glance the tool looks like it might be cumbersome but once you get it in your hand you realize how simple and effective the ergonomics of the tool are. Offering good leverage for all of the small fasteners on your bike, be it the precision adjustment of limit screws or adjusting the handle bars because you had one beer too many when you bolted them down late last night. Available in 5 pre-configured options or fully customizable to fit whatever mix of fasteners your bike requires. We suggest buying a tool for each of your bikes and leaving the tool stored away until needed. These little multi-tools are the result of a collaboration with fellow Bend OR residents, Argonaut Cycles and is the only American manufactured multi-tool for the bicycle market.

This simple tool is designed to remove and install the static bearing in the shock ends of many modern rear shocks. Machined from durable stainless steel this compact tool allows the user to remove and install the DU bushings without resorting to hammers and punches. The coarse acme thread keeps the constant turning to a minimum.

The lever setter is a unique tool that works in conjunction with our HAG (or other hanger allignment tool) to set brake and shifter levers at the same height from side to side. The tool temporarily replaces the headset top cap and allows you to thread a hanger alignment tool into the lever setter. Use the HAG indicator to set levers the same from one side of the bar to the other. Once you're satisfied with your lever placement simply remove the tool and replace your headset top cap and go ride. Compatibility: Requires a star nut or compression plug with a M6x1 thread. Works with road and mountain shifters and brake levers. Compatible with most hanger alignment tools on the market. Recommendations: It's advised to use a spacer on top of the stem to help align the lever setter with the steer tube. This will reduce the impact the quality of the cut on the steer tube has on the function of the tool. The supplied threaded stud can be replaced with a longer one if needed.

This dedicated socket is built to engage all 4 of the holes on a SRAM dub crank arm dust cap. These caps don't normally need to be removed but when you do need to work with them, few things work well. These tools feature a common 3/8" square drive like the rest of our socket range and also have a hexagonal exterior so you can mount them in a vise and use the crank arm as the lever if so desired. The sockets are also marked for the left hand thread (clockwise to loosen) this part uses. Compatible with all SRAM dub cranks, road/mountain/gravel.

The unique thing about our Saw Guide is that the clamp is open, so you can slide it around the steer tube instead of having to slide it over the end. It doesn't sound like that big of a deal but it means you can get an accurate and square cut without taking the fork off the bike and more importantly without taking all the cables out of the bike. Use this tool once for that application and it's paid for itself. Of course it will work on normal steer tubes as well and give you a nice square cut every time. The guide is two sided, one side for standard toothed metal cutting blades and the opposite side is wider for abrasive blades used to cut composites. You can also use the guide in a vise like you're probably use to and it's pretty compact if you want to travel with it. Compatible with 1" and 1.125" steer tubes Currently not compatible with cutting handlebars!

The quintessential bikepacking bag for the great outdoors. Perfect for bikepacking trips in the wilderness and carrying layers for all-day rides. Designed to hold light, compressible clothes and gear on off-road rides, the seat bag provides a spacious compartment under the saddle, eliminating the need for a rear rack. It's held securely by a stable three-point attachment system, ensuring maximum comfort and dropper post compatibility. The all-weather fabrics offer unparalleled resistance to abrasion and tears, and it's also simple to pack down. - Abrasion-resistant panels for protection - Roll-down closure for adjustable capacity - Reinforced structure for increased riding stability - Reflective graphics and light attachment point for increased visibility - Hard-wearing, all-weather Dimension-Polyant VX21 - Compatible with dropper posts when using adapter - 377g

Attaching to bottle cage and accessory mounts, the Innovation Lab Cargo Cage provides a secure mounting point for attaching bags and accessories to your bike. Compatible with two and three bolt mounts, the Cargo Cage features an optional extending foot for increased capacity. - Designed to complement the Expedition Cargo and Expedition Fork packs - Slim design for downtube clearance - Universal strap attachment system - Precision-crafted from 6061 aluminium alloy - Corrosion-resistant ano finish and stainless bolts - 85g

This pack can be attached to any cargo cage, providing additional storage space on forks, below downtubes or within the frame. At 1.3L, it's the perfect size for tools, spares or compressible spare layers. Waterproof and durable, for the longest rides and toughest adventures. - Waterproof, seam-welded construction - Hands-free air release vent - Universal attachment system - Reflective graphics for enhanced visibility - Roll-top closure for adjustable capacity - Fits the Apidura Innovation Lab Cargo Cage - Slim design to fit most downtubes - 70g

Built for urban riders and commuters who demand the most from their gear, the Allston is Bern's top-of-the-line city lid. Featuring premium Zipmold+ construction, the Allston offers three shell sizes and a Boa 360 degree retention system for the ultimate fit, while 16 large vents offer optimum air flow. The signature soft flip visor and a performance moisture-control liner round things out and give the Allston a distinctive Bern look. With a style that is at home on the way to the office as it is on the bike path, the Allston offers versatility, performance, and style all rolled into one package. - Weight 356 Grams - Standards CPSC, EN1078

With its sleek, lightweight fit and simple design, the FL-1 Libre is for riders who are looking for a dependable helmet that will protect your head, and won't break the bank. With 18 vents, In-Mold design and Crank-Fit adjustability, the FL-1 Libre keeps you cool and safe while burning pavement, or taking in the fresh mountain air. Life, Libre and the pursuit of happiness! - Small: 52-55.5cm, Medium: 55.5-59cm, Large: 59-62cm - Weight 248 Grams - Standards CPSC, EN1078

- Kid's Zipmold Warm Weather Liner - For Nino

- Women's Premium EPS Winter Liner w/ Boa Adjuster - For Lenox, Brighton

- Women's Premium Zipmold Winter Liner w/ Boa Adjuster - For Berkeley

A neat little gadget, that is particularly interesting for anyone who likes to wrench on their bike. Designed like an ordinary headset spacer, the Aimy slides onto the steerer tube and has a stainless steel bolt that clamps down so that the steerer tube cannot fall through your headset, once you take off your stem. - Machined from aluminum - Fits 1-1/8" steerer tube - Thickness: 8mm - Weight: 8g

Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post. Compatible with: DIVINE

Well, what´s to say about our DIVINE SL? It is simply the lightest production dropper post in the world with a total length of 445mm and 125mm infinite drop. Tailored to the needs of XC and marathon racers, the DIVINE SL is the youngest offspring of our dropper family. Based on the award-winning and patented REVIVE technology, we´ve modified the internals to work perfectly with the shorter travel. - Infinite adjust, 125mm travel - Total overall length: 445mm - But can be easily cut to as short as 375mm - Titanium saddle bolts - Tapered lower tube - Compatible with oval and carbon saddle rails - Sub-zero temperature functionality - Fully user serviceable - 450g Sold as seatpost only—Remote/Trigger's are sold separately.

Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post. Compatible with: DIVINE SL and DIVINE SL RASCAL

Service kit for 100 hour service (readjusting play and replacing wiper). Kit includes: - 1x Wiper - 6x Glide pin - 1x Lower bushing - 1x Foam ring - 1x C-clip - 1x Upper bushing

Multi-purpose suspension grease. Special additives help prevent corrosion and seizure and keep wipers and seals smooth when using it for routine services on your BikeYoke dropper post. - Suitable for all BikeYoke dropper posts - Size: 30ml (lasts for 5+ full services)

Single aluminium clamp design with covered/hidden bolt - Dual-compound with soft grip area and harder endcaps for impact and scratch protection - Non-centric, offset-design. The grips are indeed round, but the rubber is thicker on the rear side, so we have around double the rubber thickness on the palm side - Cut-out inner sleeve for extra rubber thickness on the palm outside for even more extra padding and damping - Relief pattern on the outside palm area (rider facing) and on the fingertips area (front side) for feeling and grip - Weight: 113g /pr - Length: 140mm - Diameter (rubber part): 31mm - For handlebar diameter: 22.2mm

Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post. Compatible with: REVIVE / REVIVE 2.0

Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post. Compatible with: REVIVE MAX

The REVIVE MAX 213 follows her slimmer sister and now comes as a 2.0 version with 213mm of infinitely adjustable travel. With the release of the REVIVE 2.0, the extra-long 213mm post required a lot of re-thinking for the whole chassis structure. Finally there is a dropper that gives a stunning look in beefy seattubes while gaining strength and stiffness at the same time. - Updated one-piece 3D forged upper tube design for increased stiffness - New CNC actuator lever provides even smoother action - The patented Reset Valve function easily bleeds/resets your "springy" post in just a few seconds - Low friction and super smooth movement, due to less seals and it's non-IFP design - Sub-zero temperature functionality - Short overall length; 213mm post is 582mm long - Compatible with oval and carbon saddle rails - Rotatable foot for extra clearance inside the seat-tube - Fully user serviceable - 690g Sold as seatpost only—Remote/Trigger's are sold separately.