Parts & Accessories
$6.99 - $195.93
- Permanently seals tube punctures up to 1/8 inch - Non toxic formula installs easily through Schrader valves - Complete with valve core remover and filler tube - Slime keg fills 160 tires at 1/2 the price per ounce of the 16 oz size
The Problem Solvers Presta Valve Extenders add 33 to 50mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders simply screw onto your Presta valves by hand.
A good pair of valves can make a big difference in the reliability and ease-of-use for any tubeless setup. Whisky's No. 7 Brass tubeless valves help ensure your tires are dialed for every ride. And, it's always a good call to keep an extra valve in a pocket or bag. - For use with Whisky tubeless rims and most others - 40mm length - Fits up to a 8mm valve hole - Removable valve core - Sold as a pair
- Anodized alloy construction - Fits standard Schrader valves
$10.99 - $14.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - MTB 50 mL: Repairs and inflates low-volume MTB tires in less than a minute. - MTB Magnum 75 mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
Challenge's Valve Extenders screw onto the end of Presta valves to make the valves 42mm longer so that the valves will protrude through wheels with tall rims far enough to be able to attach your pump and inflate the tires. You get two extenders and a wrench for them.
This is Continental's glue for gluing tubular ("sew-up") tires on aluminum tubular rims. The container has a brush built into the screw-on cap for easy glue application. You get enough glue to install about 12 tires.
- Forged alloy construction - Fits Schrader valves
Save the saddle bag for a snack and Swiss army knife. These patented, composite tire levers slide into the end of drop bars, staying hidden, yet fully functional. - Composite construction - 16g each
- Specific DT-Swiss tubeless ready valve stems for tubeless applications
- 6061 Aluminum valve and cap - Removable valve core - 4mm allen key slot for easy installation and removal - Comes with round & square rubber bases for different rim types - Spare alloy valve cap with integrated valve core removal tool
• Includes a plastic storage box, 6 patches, cement, and scuffer
- Ingenious snap-In plugs do the work of rim tape at 1/3 The weight - Makes tire installation easier and nipple repairs faster than with tape - Red plugs fit rims with 8mm holes - Yellow plugs fit rims with 8.5-9.3Mm holes
$8.00 - $50.00
Whisky’s tubeless rim tape is designed to make setup as easy as possible. Elasticity allows for smooth, even adherence while translucency lets you see where the tape contacts the rim. Different widths available to fit almost any rim.
Are you switching your bike over to tubeless or in need of valve replacements? Serfas' Tire RX replacement valves will do the trick. Complete with 32mm valves with removable cores, an extra valve core, Schrader/Presta adaptor & a core removal tool. - Two 32mm Presta Valves - Valve Key - Includes Additional Valve Core - Removable Cores - Fits All Rims, Standard & Tubeless - Presta To Schrader Adapter
$19.00 - $20.00
Seal your wheel with Serfas' tubeless rim tape. - Good For 2 Wheels With 2 Layers - High-Quality Light Rim Tape For Preventing Air/Sealant Leakage Through Spoke Holes
$31.00 - $36.00
Protect your tube from spoke hooks with CT Cotton Rim Tape. - Adhesive Backing - 10 Rolls Per Box
Serfas' Tubeless System Combo Kit offers the ultimate kit to go tubeless! Tire Medic Sealant and tubeless rim tape let you seal up your regular clincher rims so you can enjoy superior ride quality. Included in the kit is two Presta valves with removable cores, extra valve core, presta to schrader adapter and two fill fill tubes. There has never been a better time to go tubeless! • compatible with presta valves • includes: two 125ml sealant bottles, rim tape for two wheels with inner width of 15-17mm, presta to schrader adapter, two fill tubes, two presta valves with removable cores, presta key & extra valve core •sealant is co2 compatible • sealant will not freeze
- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel
Bigger than standard Presta valve nuts, the Big P-Nut is designed to provide extra leverage to better tighten tubeless valves on standard tubeless rims. - Over-sized design provides extra torque when tightening - CNC-machined from AL-6061 aluminum - Kit includes two 40mm long brass tubeless valves
$19.90 - $23.90
- Half the weight of the original Mr. Tuffy Tire Liner - Rubber shield fits between tire and tube to prevent flats - Back of the liner is serrated to keep it in place inside the tire and curved to match the profile of the tire
These oversized Presta valve nuts are specifically designed to provide extra clearance and extra leverage to better tighten tubeless valves. They're especially helpful on single-wall rims. -Concave to allow better engagement of the valve/rim interface -Oversize to provide extra torque when tightening -Especially helpful on single-wall rim tubeless setups -CNC-machined AL-6061
Don't let a flat tire ruin your ride. Serfas' unique micro-particle blend instantly seals quarter inch punctures & keeps you rolling forward. Pair this sealant with Serfas' full line of sealant accessories; including, rim tape, valves with removable cores, & valve adaptors for best results. - Flat Protection - Seals 1/4 Inch Punctures - Can Be Used In Tubeless, Tubular & Tubed Application - Bottle Is Good For 6-16 Mountain Bike Wheels Depending On Size - Most Economical Size - Contains Micro-Sealing Particles - Sealant Does Not Freeze - CO2 Compatible - Compatible With Serfas Tire Medic Sealant Kits
• Integrated presta valve extension • Machined alloy construction • Available in 30mm, 50mm, and 70mm • For use with inner tube with removable Presta valve core
- Designed by pros specifically for tubeless applications - Permanently seals tube punctures up to 1/8 inch - Non-toxic, non-corrosive and non-hazardous formula - Recommended 2oz per mountain tire, and 1oz per road tire - Aids to seal the bead on UST rim/standard tire and tubeless conversion set-ups
Precision engineered for precise inflation of your Zipp wheels, these Zipp Tangente Valve Extenders take the hassle out of short Presta valves. - For use with threaded Presta (non-removable core) tubes - Knurled end to keep pump from slipping - Available in all lengths to match all Zipp wheels - 3mm hex broach in the barrel to guarantee a perfect seal when tightened
Works with Zipp butyl inner tubes with a removable core as well as other leading tubular tires and inner tubes that have removable cores. Available as a kit (3 extenders and 2 wrenches) or individually. - For use with removable valve core Presta tubes - Knurled end to keep pump from slipping - 3mm hex broach in the barrel to guarantee a perfect seal when tightened - Integrated air seal
Vittoria's Mastik'One is a professional-grade tubular cement that has been trusted by the pros for decades. It provides excellent hold on both aluminum and carbon rims, and gives you the piece of mind that comes with knowing you're riding on the best. - Choose from 250-gram tin or 30-gram 12-pack - 30 grams is enough for one to two tires depending on surface area
$12.99 - $14.99
- Semi-transparent for precise application, this lightweight Rim Tape creates an airtight seal in a vital step for tubeless setups. - 18mm x 10 yards - Transparent to ensure consistent adhesion through a quick visual verification when applying the tape - Won't leave residue when changing tape - Slightly stretchy to allow for easier application - 10 yards per roll
With a Schrader core remover on one end and a Presta remover on the other, you can’t go wrong with this zinc alloy valve core remover tool. Threads apart in the middle and contains two Presta cores with a rubber o-ring for a watertight closure. - Presta/Schrader tool with valve core storage inside - Made from zinc alloy - Includes (2) Presta valve cores - 80mm x 10mm/3.15 x .39-inch - An essential accessory when converting to a tubeless system.
Page 1 of 3 Next page