The VPD 2.0 Knee protector is a multi-purpose knee protector combining freedom of movement with an exceptional level of impact absorbency. The protector is constructed from a reinforced stretch fabric and features an elastic strap to further secure the pads in place. The protective padding is perforated to improve ventilation and heat control. Its impact absorbency rating meets the toughest EN1621-1 Level 2 standards, giving exceptional protection from impact forces in a fall. The Joint VPD 2.0 Knee pad is ideal for downhill riders who require the highest level of protection. The VPD material warms and adapts to the shape of the body, providing freedom of movement, but when exposed to impact, the material hardens, providing exceptional impact absorption. As well as providing a high protection level, the pad is very wearable and user-friendly, with good freedom of movement.
$70.00 - $70.95
Developed for cyclists who want enhanced flexibility, ventilation, and freedom of movement, Joint VPD Air Elbow is a light-duty elbow pad that uses our lightweight and highly impact-absorbent VPD compound. The pad is covered in reinforced stretch fabric and features neoprene antislip to keep the pad in place, even in rough riding conditions. A crash retention strap further increases security on this lightweight and low-profile elbow pad ideally suited to trail riding. - Lightweight and impact absorbing VPD compound - Reinforced stretch fabric - Neoprene anti-slip on the inside - Designed with a low profile - Crash retention strap (CRS) for a comfortable fit - Neoprene anti-slip on the inside
After the successful introduction of the first generation S1 Safety Jackets, the new improved S1 Defense Protection Jackets are now available! S1 stands for Safety First and protects every rider against the first impact. The lightweight vests are anatomically designed for a perfect fit. Equipped with the latest protective materials makes this vest the ideal combo of protection and comfort. S1 Defense Pro 1.0 features: Drip dry 15% spandex 85% nylon breathable mesh base layer Integrated EVA 3 layer foam pads New Design shoulder pads New Hard Shell Kevlar elbow pads with new integrated strap that fits and stays on the elbow YKK Zipper for easy fitting CE certified Available in Youth and Adult sizes S1 Defense Pro 1.0 Safety Jacket Rider Height - Weight Youth XS : 100 - 120 cm, 323 gram Youth Small: 115 - 135 cm, 331 Gram Youth Medium: 130 - 150 cm, 336 Gram Youth Large: 142 - 160 cm, 411 Gram Youth X-Large: 152 - 168 cm, 442 Gram Adult Small: 160 - 170 cm, 475 Gram Adult Medium: 165 - 178 cm, 517 Gram Adult Large: 170 - 185 cm, 545 Gram Adult X-Large: 180 - 192 cm, 599 Gram
$289.95 - $289.99
The Leatt DBX 3.5 neck brace is lightweight, has an adjustable rear thoracic strut, and is super stylish. This makes the 3.5 a great buy. The brace is designed to reduce forces during an accident and transfer them through the brace into the strong muscles of the body, rather than the small fragile bones in the neck. Feel protected and ride with confidence. Independent off-road motorcycle study by Great Lakes EMS Inc (Action Sports EMS) show that neck braces offer: - Up to 89% reduction in critical cervical spine injuries - Collarbone injuries up to 45% MORE likely WITHOUT a neck brace Specs - Independently lab- and rider-tested, proven to reduce neck forces and neck injuries - Engineered collarbone cut-out to keep your helmet rim away from your most vulnerable bones - Polymer matrix platform allows for the most efficient reduction in neck forces - Optimal helmet rim striking platform is designed to redistribute neck forces and provides the helmet with freedom of movement - CoreFlex split rear thoracic strut is designed to work with the body's natural movements for a more comfortable fit - Adjustable Thoracic strut engineered to break away before applying excessive pressure to the back - Sculptured, split front for improved comfort and fit - Airflow ribbed body padding for optimum ventilation - Free, optional clear chest strap included - CE tested and certified as Personal Protective Equipment 89/686/EEC - Weight: 497g (1.1lbs)
DESCRIPTION F-16 combines everything you need for this weekend. A simple yet classy look built with a material construction that’s lightweight and ready for fun. The F-16 line is entry level on price but overperforms every step of the way. PRODUCT DETAILS Tag-less comfort-stretch collar Relaxed shorty elastic sleeve cuffs Lightweight, durable polyester construction for maximum performance and comfortable fit Extended tail helps keep jersey tucked in Standard fit: not too tight, not too loose
Construction: Mid weight, 80/20 cotton-poly blend heather fleece zip up Details Appliquéd logo on front chest.
PRODUCT DETAILS Lightweight protective race glove Four-way stretch finger sidewall for flexibility, comfort, and airflow Soft-flex logos provide protection and a clean look Reinforced double layer palm and thumb Split knuckles with ventilated gusset Adjustable wrist closure for a secure fit Silicone finger grippers Comfortable classic fit: not too tight, not too loose
POC's Joint VPD 2.0 DH Long Knee pads throw down full-on crash protection for riders pushing their limits and pushing the sport. They use Visco-Elastic Polymer Dough that forms to your legs and is flexible when moving, that then turns rigid upon impact. It's so tough, the 3D molded VPD 2.0 complies with motorcycle standards. Kevlar reinforced stretch fabric and dual straps keep them locked down where they belong. The plastic knee cap adds an extra layer of protection and reduces friction with the ground when crashing. The extra length helps in the event of the dreaded slipped pedal strike.
EVA molded impact hip pads for enhanced hip/thigh roost protection Removable impact foam tailbone pad Super soft elastic waistband Low profile chamois pad acts as moisture wicking layer Designed with fewer seams to reduce pressure points
S1 Defense protection vests: After the successful introduction of the first generation S1 Safety Jackets, the new improved S1 Defense Protection Jackets are now available! S1 stands for Safety First and protects every rider against the first impact. The lightweight vests are anatomically designed for a perfect fit. Equipped with the latest protective materials makes this vest the ideal combo of protection and comfort. S1 Defense Elite 1.0 features: Drip dry 15% spandex 85% nylon breathable mesh base layer Integrated S.A.M. pads. 40% more shock absorbing than the standard Defense Pro 1.0 pads New Design shoulder pads New Hard Shell Kevlar elbow pads with new integrated strap that fits and stays on the elbow YKK Zipper for easy fitting CE certified Available in Youth and Adult sizes
Designed to fit your kid, the Bantam Roost Deflector offers all the protection of an adult piece sized for the little guy or gal. Bio-foam Construction –An impact absorption material designed for comfort and breathability TPR Shield –A durable, pliable material designed to protect the chest and back from debris and impacts. Fit –Form fitting material and adjustable elastic strap allows for maximum comfort and fit. Size –Mini S/M (ages 3-5) | Youth L/XL (ages 6-9)
The Joint VPD System Elbow is a highly flexible 2ply elbow protector which conforms with international shock absorption standards. The elbow protector features a highly efficient ventilation system and an outer fabric which is made with high tenacity polyamide yarns for low friction and high abrasion resistance. VPD is the perfect material for mountain biking as it wraps around a riders body shape when warm which gives great freedom of movement on a bike. To protect riders during a fall the VPD technology then hardens on impact to help minimize injury. - Extremely flexible and light VPD elbow pad - EN 1621-1 certified shock absorption - Ventilation system constructed within each layer to optimize moisture management and comfort - Low friction polyamide construction high abrasion resistance
The Bionic Neck Support Tech 2 is constructed from an advanced, high-performance carbon polymer compound and is designed to help prevent injury in a crash situation by dissipating and diverting impact forces away from the neck and spine. The BNS functions when the rider’s helmet makes contact with the frame at the moment of a crash, thus providing a clean, solid surface which instantly channels damaging, compressive impact energy away from the neck and on to the BNS. Featuring Alpinestars’ exclusive and revolutionary rear stabilizer for progressive force relief (PFR) the BNS Tech 2 is designed for use in motocross and off-road riding and offers a highly personalized and stable fit while incorporating innovative new features such as a new quick release locking system. • Category 2 PPE - CE Certified Under EU Regulation 2016/425
Specially designed for youth or smaller framed rider the Youth Neck Support functions when the helmet and support frame provide an alternative load path for the excessive energy that compresses the neck. If the helmet is in contact with the neck support at the moment of impact the overall load passing through the neck can be reduced, which may prevent a fracture from occurring and reduce the chance of muscular injuries from extreme head movement. Although it is not possible to eliminate the risk of any form of injury, the support has been proven to help reduce the most serious damage and minimize the risk of collateral injury as the impact load is channeled away from the neck. NOTE: This product is compatible with our Alpinestars Youth chest protectors via integration using the Velcro / Elastic straps. • Category 2 PPE - EU 2016/425. • The rear stabilizer system helps to keep the support in position and is also designed to channel extreme energy loads away from the spine by transmitting it across the shoulder and helping to avoid serious spinal injury.
Page 1 of 1