Created by athletes – for athletes, Leg Lube Performance Shave Gel offers exceptional performance over ordinary soap and shaving cream. The ultra-lubricating and natural formula reduces drag, nicks, in-grown hairs, razor burn and dry skin and can be used anywhere you shave: on the legs, face, arms, chest, bikini and back. You can even use Leg Lube out of the shower and without running water, by wiping your razor and legs with a towel! Plus you'll love the pleasant scent and the way it leaves you feeling fresh and tingly shave after shave. Leg Lube and the bottle are made in the U.S.A. and it's even sized to meet TSA carry-on regulations.
$8.99 $9.99 10% Off
Beautiful and realistic flower adds a feminine touch to any ride.
Electra's Aluminum Bolt-On Kickstand makes it easy to park your bike upright.
Show Salsa pride and add some flare with these stickers. - Slap a sticker on your helmet, bike, or whatever you choose
Replacement SKS Rubber Straps for RacebladePro and S-Board
- EverClear is an 8-micrometer (µm) high-quality frame protection film - Each sheet is 2-feet x 8-inches. - It's designed to protect your frame against anything from rock chips to cable rubs and everything in-between. - Included is a sheet large enough to cover your down tube, top tube, chain-stay, cable rub points and crank arms. Also works great for fork lowers, shock bodies, and more! Especially great for protecting carbon frames or decals. - It’s easy to cut and apply; simply trace and cut your desired pattern(s), clean your surface, and apply where necessary! - Want to boost re-sale value of you bike? EverClear is your ticket! By applying this stealthy 8µm protection to your frame when it’s new, you can preserve that new look without using any bulky and ugly frame protection. Then, when it’s time to sell, you can remove the EverClear, and you are left with a beautiful like-new bike that’s ready to get top dollar in re-sale. - Made in the USA
The Saris Leveling Block keeps your bike level with your trainer. - Adds stability to your training ride. - For use with any rear wheel-mounted trainer. - Raises front bicycle tire 1.1 inches (2.8 cm) off the ground
Frame decal set with headbadge for repairing or repainting your Surly ECR.
Show Surly pride and add some flare with these stickers. Slap one on your helmet, bike, or whatever you choose.
- Custom brass headtube badge - Tough 3M adhesive backing - Fits most current frame headtubes
The Surly Deck Bar is just what it sounds like, a convenient handlebar that attaches to the rear deck of the Big Easy, Big Dummy or Big Fat Dummy. Once attached, you will find that this is a very nice place for your passengers to grip and hold on tight while you cart them around town. I mean it’s that or the old uncomfortable around the waist hug move. You can decide what’s best for you and your passengers. Grips are also included with the bar, so you’ve got that going… - The Deck Bar attaches directly to the Dummy Deck to offer a secure hand grab for passengers - Provides a solid, comfortable handhold for riders large and small - Also available as part of the Corral Kit
$15.99 - $21.99
• Self locking rear mount design • Fully adjustable length for 26" to 29" wheels • Alloy construction
TYR's Crossblade fins are a great all-around training fin. By combining the best of a short blade fin for tempo work and a long blade fin for building power, you get the best of both worlds with one set of fins.
Stickers/Decals for repairing or repainting your Big Dummy frame. - Includes frame and fork decals - Includes headbadge
The Mag Riser Block 3 from Minoura lifts up your front wheel during a training session to be at a natural level. This block fits both MTB and Road bike tire widths. - Fits under front wheel to level the bike to get natural riding on training - Double grooved design fits your narrow or wide ties - Polyethylene material minimizes weight at 1/2 lb. - 8.6D X 4.7W X 2.75H (inches)
$2.00 - $7.00
You can proudly display these Surly Logo Stickers just about anywhere they'll fit. They comes in three sizes to meet a wide range of sticking needs.
Stickers/Decals for repairing or repainting your Surly Pack Rat. - Includes headbadge
Designed by Tullio Campagnolo, the BIG Corkscrew is a signature of artisanship of the Campagnolo brand and a masterpiece of functionality. 100% made in Italy by Italian craftsmen. Telescopic, self-centering bell perfectly positions the screw in the center of the cork - Screws harken back to seventies era Super Record cranks - Packaged in a collector's box - Two levers pull the cork out easily and delicately ensuring the bottle is not shaken, distubing sediment in aged wines - Designed so the screw will never completely twist through the cork, preventing pieces of cork dropping into the wine - Bronze is finished in a "vintage" hand-produced look. Satin is a great match for modern interior decor thanks to its sheen typical of steel
An adjustable, rear integrated kickstand that supports bikes of all sizes, from 24" to 29" wheels. Adjustable length fits more bikes Intended for bikes with an integrated mount at the rear dropout, this ultra-stable kickstand with an adjustable length will keep even the most stubborn bikes upright. Installation is quick and easy and the adjustable length works for bikes with wheels from 24-inch wheels all the way to 29-inch wheels. - Adjustable length fits bikes with 24-29-inch wheels - Compatible with Trek bikes equipped with integrated direct mount chainstays - Will not interfere with pedaling - Super strong and stable platform will hold your bike upright even with gear on the rack
Surly Disc Trucker frame decals. - Dry transfer style - Includes headbadge
• Rear mount • Fits 26" wheels • Aluminum
• Aluminum double kickstand • Includes top plate • Adjustable for bikes from 24" to 700c
TYR's Soft Silicone Ear Plugs mold easily to your ears for a comfortable, watertight seal. A storage case is also included to keep your ear plugs clean.
TYR's Burner EBP Fins are a great training tool for building strength while maintaining a high cadence kick. The ultra-soft, high-buoyancy rubber helps elevate your lower body to maintain proper position. There's even a Wall Gripper Footpad so you can push off from the wall with confidence.
This handy tool easily installs or removes integrated Sprague style kickstands and can be used on either steel or aluminum frames.
•Uses one 9v battery (not included) •Fits most handlebars
The STL-3K is kit that will add a back rest to the STL-1.2 work stool (sold separately). The STL-3K includes a back rest, two steel support bars, and fasteners. NOTE: The STL-3K will only work on the STL-1.2 work stool. The previous STL-1 work stools will not accept the STL-3K
- Specific protector for fork mount carriers - Protects bike from dirt, Bugs and extreme weather while transporting bike on roof rack - Coated nylon cover keeps seat dry, Includes nylon storage bag
Page 1 of 5 Next page