Filter By:
- Show More Sizes
- Show Fewer Sizes
Headset

$8.99 - $18.95
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Durable steel construction

$12.95
The Answer Carbon Headset Spacer Kit includes a pack of 3 carbon fiber headset spacers in 3, 5 and 10mm stack heights. Available to fit 1? and 1-1/8? steerer tubes.
Weight: .04 oz

$16.20
Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out.
• Technical Description: IS52/40/H1
• Bottom Type: IS - Integrated
• Bottom Head Tube Inside Dia.: 52.1mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Polymer
• Bottom Stack Height: 1mm
• Bottom Bearing Type: Black Oxide
• Material: N/A
• Weight: 35.35g

$18.95
When you are looking to save some steer tube skin on the new Daggers you just bought and not cut them down, our alloy spacer packs give you all the stackin stability you need for that stem of yours. Three spacers to a pack (1?, .5? and .25?).
Weight: 0.2 oz

$18.95
Designed to make 1” steer tube forks adaptable to a 1-1/8” head tube frame, these headset reducer cups are pressed into the frame and then a 1” headset can be installed to use a 1” steer tube.
This is for standard headsets/head tubes ONLY
Weight: 0.8 oz

$19.99
This custom 7075-T6 aluminum pre-load bolt design is included with every Odyssey fork.
- Fits both a 6mm and 8mm allen key.
- Front brake cable thru-way hole for removal without disconnecting brake hardware.
- Designed with an easy-cut thread groove if you cut your fork’s steerer tube down.

$20.70
Cane Creek's Aheadset is a simple, affordable solution for your headset needs.
• Bearing Type: Cup and Cone
• Color: Black
• Crown Race: 26
• Defined Color: Black
• Lower Stack Height: 12 mm
• S.H.I.S Lower: EC30
• S.H.I.S Upper: EC30
• S.H.I.S. Stem Clamp Diameter: 25.4
• Upper Stack Height: 18 mm
• Weight: 163 g

$20.95
- Steel cup semi-integrated design
- Alloy top cap with hollow bolt allows for brake cable pass-through
- Caged bearing 5/32" x 22A
- ED Black durable finish
- SHIS: ZS44/28.6|ZS44/30
- Steerer OD: 28.6mm
- Cup: 44mm
- Race: 30mm
- Stack Height: 9.4mm

$22.95
Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out.
• Technical Description: ZS44/28.6/H8/K|ZS44/30/H4/K
• Top Type: ZS - ZeroStack
• Top Head Tube Inside Dia.: 44.00mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 8mm (Short), 15mm (Tall)
• Top Bearing Type: Black Oxide
• Material: 6061 aluminum
• Weight: 62.79g

$22.95
Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out.
• Technical Description: ZS56/40/H4/K
• Bottom Type: ZS - ZeroStack
• Bottom Head Tube Inside Dia.: 55.95mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Polymer
• Bottom Stack Height: 4mm
• Bottom Bearing Type: Black Oxide
• Material: 6061 aluminum
• Weight: 35.35g

$23.95
Cane Creek's Aheadset is a simple, affordable solution for your headset needs.
• Bearing Type: Cup and Cone
• Color: Black
• Crown Race: 30
• Defined Color: Black
• Lower Stack Height: 12 mm
• S.H.I.S Lower: EC34
• S.H.I.S Upper: EC34
• S.H.I.S. Stem Clamp Diameter: 28.6
• Upper Stack Height: 18 mm
• Weight: 165 g

$26.10
Can Creek's Angleset headsets let riders change the headtube angle of their mountain bike with ease. With adjustments ranging from 0.5 to 1.5-degrees, dialing in the perfect geometry has never been easier.
• Technical Description: ZS49/28.6/H11/K|EC49/40/H16/K
• Offset angle: 0, 0.5, 1.0, 1.5-degree
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 49.61mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Sealed
• Bottom Stack Height:
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 7075 aluminum
• Weight: 129g

$26.10
Can Creek's Angleset headsets let riders change the headtube angle of their mountain bike with ease. With adjustments ranging from 0.5 to 1.5-degrees, dialing in the perfect geometry has never been easier.
• Technical Description: EC56/40/H14/K
• Offset angle: 0.5, 1.0, 1.5 degree
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 55.95mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Sealed
• Bottom Stack Height: 14-15mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 7075 aluminum

$26.99 - $39.95
Designed using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times.
FEATURES
- High-quality sealed bearings.
- Color matched spacers included.
- 10mm, 3mm and 2mm (15mm total)
- Laser etched Odyssey bearings.
SPECS
- Campagnolo standard spec.
- 1-1/8 integrated headset.
- 45º tapered bearings 41.8mm outer diameter (fits 42mm BMX head tubes).

$26.99 - $32.95
New dust cap design, with Monogram laser etched logo, for a cleaner look to accommodate a taller riding set up with less spacers. Same quality as Odyssey's Pro Headset using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times.
FEATURES
- High-quality sealed bearings.
- Color matched spacers included.
- 15mm dust cap. With 3mm, and 2mm spacers
- Laser etched Odyssey bearings.
SPECS
- Campagnolo standard spec.
- 1 1/8-inch integrated headset.
- 45º tapered bearings
- 41.8mm outer diameter (fits 42mm BMX head tubes).

$27.45
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: IS52/30/H1
• Bottom Type: IS - Integrated
• Bottom Head Tube Inside Dia.: 52.1mm
• Crown Race Seat Dia.: 30.015mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 1mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: N/A
• Weight: 72g

$27.45
This is the Integrated Bottom Bearing for the Cane Creek 40 Series headset. Please contact us if you have any questions about which parts are correct for your headset.

$27.95
Cane Creek's Aheadset is a simple, affordable solution for your headset needs.
• Bearing Type: Cartridge
• Color: Black
• Crown Race: 30
• Defined Color: Black
• Lower Stack Height: 2 mm
• S.H.I.S Lower: IS41
• S.H.I.S Upper: IS41
• S.H.I.S. Stem Clamp Diameter: 28.6
• Upper Stack Height: 7 mm
• Weight: 65 g

$27.95 - $30.95
These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work.
- Engineered and manufactured in Portland, Oregon USA
- High-quality stainless steel and titanium baseplates available for all standard Chris King headset sizes
- Titanium baseplates are available in 1-inch and 1 1/8-inch sizes only
- Devolution baseplates are a stainless steel solution that allow King headsets to adapt to a wide variety of steerer tube sizes
- King Stainless Steel baseplates are available in undersized and oversized versions for irregular steerer tube sizes
- 30.0mm ID/40.5mm OD for post-April 1995 1-1/8" Headsets
- 30.0mm ID/44.0mm OD for pre- April 1995 1-1/8" Headsets

$28.95
Cane Creek's Aheadset is a simple, affordable solution for your headset needs.
• Bearing Type: Cup and Cone
• Color: Black
• Crown Race: 30
• Defined Color: Black
• Lower Stack Height: 5 mm
• S.H.I.S Lower: ZS44
• S.H.I.S Upper: ZS44
• S.H.I.S. Stem Clamp Diameter: 28.6
• Upper Stack Height: 10 mm
• Weight: 130 g

$30.60
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: ZS49/30/H4/K
• Bottom Type: ZS - ZeroStack
• Bottom Head Tube Inside Dia.: 49.61mm
• Crown Race Seat Dia.: 30.015mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 4mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 58g

$30.95
These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work.
- Engineered and manufactured in Portland, Oregon USA
- Devolution baseplates are a stainless steel solution that allow Chris King headsets to adapt to a wide variety of steerer tube sizes
- 30.0mm for 1.5 lower bearing and 1 1/8" steerer

$32.00 - $42.00
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Zero stack cups press into the head tube with very little stack height.
- Sealed black oxide bearings
- Steel crown race with integrated seals
- Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

$32.40
Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out.
• Technical Description: EC49/40/H12/K
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 49.61mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Polymer
• Bottom Stack Height: 12mm
• Bottom Bearing Type: Black Oxide
• Material: 6061 aluminum
• Weight: 76.57g

$32.40
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: IS41/28.6/H9/K
• Top Type: IS - Integrated
• Top Head Tube Inside Dia.: 41.1mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 9mm (Short), 15mm (Tall)
• Top Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 37g

$32.40
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: IS42/28.6/H9/K|IS42/30/H1
• Top Type: IS - Integrated
• Top Head Tube Inside Dia.: 42.00mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 9mm (Short), 15mm (Tall)
• Top Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 72g

$32.40
This is the Top Cover for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.

$32.85
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: EC34/28.6/H16/K
• Top Type: EC - External Cup
• Top Head Tube Inside Dia.: 33.95mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 16mm
• Top Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 50g

$35.10
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets.
• Technical Description: IS41/30/H1
• Bottom Type: IS - Integrated
• Bottom Head Tube Inside Dia.: 41.1mm
• Crown Race Seat Dia.: 30.015mm
• Crown Race Type: Aluminum, Dual-Seal
• Bottom Stack Height: 1mm
• Bottom Bearing Type: Top-quality, sealed stainless steel bearings
• Weight: 24.91g
Page 1 of 4
Next page