Protective/Armor

Designed with valuable feedback from the 3-time EWS winner himself, the Sam Hill signature knee pads are the ultimate MTB knee pads for gravity riding, whatever your discipline. Light enough to be worn all day long, the Sam Hill knee pads mould with body heat to provide maximum comfort with a breathable mesh back panel to wick moisture away from the skin. CE EN1621-1:2012 Level 2. - High length compression design to prevent pad from slipping - Extra padding surrounding main knee cap for increased protection and support - Silicone printed gripper on inside of cuffs - Silicone printed logo on top and bottom outside cuffs to grip silicone on to shorts - Mesh back for increased airflow - Certified CE EN 1621-1:2012 Level 2 - Pre-curved fit for ultimate comfort - Weight 340g (size L)

Features D3O high performance foam and an open-back construction so no shoe removal is necessary. • D3O high performance shock absorbing foam on the front and foam padded sidewalls for additional coverage • Perforated Neoprene enhances venting and moisture control; terry lined for wicking and comfort • Integrated stabilization pad centers the knee and ensures a secure fit • Branded rubber grab tabs and RF moniker logo • Open back construction; no shoe removal necessary

Invisa-Lite shin guards feature harder durometer 3D foam on the outside and an inner softer layer for comfort. - Breathable, lightweight lycra body - Interior anti-slip silicone band - Protection Area: Shin - Pad Type: Foam

Lightweight and flexible padding that is barely noticeable — ideal for riders who want complete freedom of movement and reliable protection. The VPD Air padding is both highly flexible and highly ventilated for optimal freedom of movement, comfort and temperature control. The pad is housed in reinforced stretch fabric that stays securely in place thanks to an inner lining of anti-slip neoprene and an elastic strap with Velcro fastening. A low-profile design further supports practicality and comfort, enhancing the barely-there feel of the pads. - Lightweight and impact absorbing VPD compound. - Reinforced stretch fabric. - Elastic strap for a comfortable fit. - Neoprene anti-slip on the inside. - Designed with a low profile.

The Charge Elbow Pads feature targeted foam protection and stretchy mesh for a superior fit and low bulk. - Butterfly mesh sleeve with second-skin fit and targeted coverage - Foam panel with stretch-Kevlar cover for durability against nicks and abrasions - Silicone gripper along inner top opening ensures a stay-put fit

With the Flow Evo+ knee guard, iXS provides super thin, light and comfortable knee protectors. Developed with mountain bike legend Hans Rey, pads are super compact to fit any backpack. The integrated Xmatter padding concept provides high impact absorption and protection. With the Flow Evo+ we introduce product properties like exchangeable padding, structurally improved AeroMesh of newest generation offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - Aeromesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified

A Light Compression Base Layer With Integrated D3O Knee Protection And Chamois Designed with input from our global athletes, the Enduro Pro Tight is a complete solution for mountain-bike-specific lower-body protection. The knees feature CE-certified impact protection while the dual-density EVO chamois adds excellent comfort for long days in the saddle. The lightweight compression built into the main material helps to keep your legs fresh and cool while shredding down the trail. Features - Reinforced skid plate in the knee reduces friction with the ground in a sliding fall - CE certified D3O insert for world-leading impact protection - Dual Density EVO Chamois for added comfort in the saddle - Super-lightweight breathable 3/4-length tight provides seamless comfort - Screenprint logo's - Inseam: 22" Construction - 73% polyamide nylon / 27% elastane

The Launch pads from Fox are high-tech leg armor for mountain bikers that protect you like no other. With Fox's X-Up strapping system, the knee cap locks onto both sides of your knee to prevent twisting and slipping. The ribbed hard-shell plates are asymmetrical for comfort and provide superior impact protection. Plus, they're even vented to breathe well, so you can wear them on every ride.

With the Flow ZIP knee guard, iXS provides super thin, light and comfortable knee protectors. According to its name the Flow ZIP features an elastic zip FlexZip which simplifies putting them on and off. Developed with mountain bike legend Hans Rey, pads are super compact to fit any backpack. The integrated Xmatter padding concept provides high impact absorption and protection. With the Flow ZIP iXS introduce product properties like exchangeable padding, structurally improved AeroMesh of newest generation offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - Flexzip, Stretchable Zipper - Aeromesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified

More durability. More comfort. More customized fit. Pro-Rugged Knee Guards deliver more, because you demand it. So bring on more trails with sharp branches and rocks. Pro-Rugged Knee Guards are made with the same legendary, soft, ultra-conforming G-Form technology that hardens on impact. But now with much, much more. Featuring SmartFlex: Flexible As You Ride. Hardens on Impact. - Body-mapped impact-absorbing SmartFlex pads - Armortex technology adds durability to your pads and resists tearing or catching - Adjustable fit-strap for customized comfort and security - Ultra-comfortable double-knit compression fabric for extra protection - Extra-wide top gripper distributes pressure and keeps pads in place - Ventilated mesh back keeps you cool and dry - Low-profile bottom gripper keeps pads in place - Soft inner foam keeps pads secure and comfortable on your knees - Machine washable

Fox's Youth Launch Pro Knee Pads give you hard-shell protection with soft-shell comfort and fit. A Kevlar knee panel covers a tough plastic knee cup for serious impact protection and the perforated neoprene body is pre-curved for an ergonomic fit. Plus, silicone grippers behind your knees, as well as top and bottom straps, give you stay-put coverage, even while pedaling, so you can focus on the action ahead.

Old School Neoprene guards are the most comfortable protective gear you will ever wear. Designed by Lizard Skins and manufactured in our Utah Facility. Made of 5mm perforated Airprene, 1/4 inch foam inserts, injected molded plastic inserts and a 2mm Powertex crash panel.

The Flex Shorts offer protection on the hips, coccyx and thighs. Areas prone to injury or re-injury can now be protected with a compression fit short that flexes to the body's shape in all types of riding. - Flexible curve 1mm flexible side panels for a contoured fit and polygon perforated foam pads on the hips and legs - Rear yolk designed to protect the coccyx - All pads are removable for washing - Double layer polygon foam for increased ventilation and airflow - Jaquard knit elastic waistband and compression fit - Designed beyond CE EN 1621/1 Standards

These body-mapped, impact-absorbing SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact. - Ventilated SmartFlex hip pads allow airflow to keep wearer dry and comfortable - 4+ hour chamois to remain chafe-free - Moisture-wicking, UPF 50+ compression fabric - Side leg pocket - Machine washable - CE PPE II—15613 Impact Attenuation / 1621-1 coverage

Without compromising on safety and surpassing the relevant CE test the Transition pads offer comfortable protection in a super-light package. At 262g per side in Medium they are a true fit-and-forget piece of kit. - Low profile, minimal protection at its best - Compression fit kneepad with high-strength, flexible 1mm cap for superior fit and movement - Poly/Spandex and 4 way stretch mesh that is rollable and stowable enough to fit in a jersey pocket - Designed beyond CE EN 1621/1 Standards

Flex Knee pads are for riders looking for soft pad comfort with the protection of a hard shell. Abrasion-resistant material covers the front and sides to give a full-on protection package. - Double layer custom foam for increased airflow and reduced weight - Upper calf muscle support to prevent pad from slipping - Center adjustment strap provides even tension above calf muscle and around top of pad - Custom idp polygon neoprene for superior protection and ventilation - Designed beyond CE EN 1621/1 Standards

Our super-light Youth Transition pads are designed for younger riders looking for lightweight protection that can be worn all day long. The Transition pads mould with body heat to provide maximum comfort with a breathable mesh back panel to wick moisture away from the skin.

Our most innovative knee pad to date, the project knee is super light, breathable and offers top-level protection. The unique knitted design and CE approved protection gives riders outstanding comfort and confidence. CE Certified Level 2. - Center Strap System allows for even adjustment - Flexible front knee cap increasing durability and protection - Proknit fabric to control elasticity - Thigh-length Proknit main body to prevent pad slipping - Articulated cut for the perfect fit - Silicone top and bottom elastic gripper - Silicone logo print to assist in gripping liner undershorts silicone tape - Certified CE EN 1621-1:2012 Level 2 - Extra protection around the outside of the knee - Weight 430g pair (size XL)

Designed with valuable feedback from the legend himself, the new Sam Hill Lite signature knee pad is designed to be the ultimate ultra-lightweight knee pad for trail riding and the racer seeking super light protection. The Sam Hill Lite knee pads mould with body heat to provide maximum comfort with a breathable sleeve to wick moisture away from the skin. Unlike many minimalist pads, the Sam Hill Lites pass CE EN1621-1:2012. - Rollable and stash-able using the elastic loop - Durable knee cap fabric for increased durability and protection - Compression square line Ripstop spandex allows for a durable lightweight feel - Long thigh-length fit for no slippage and all-day comfort - Silicone top and bottom cuff elastic gripper - Silicone logo print to assist in gripping short liner cuff - Certified CE en1621-1:2012 level 1 - Weight 205G pair (size XL)

- Made for the e-xtreme - Hard shell gives protection and ability to slide on hard surfaces - Top and bottom adjustable hook and look fit-strap for customized comfort and security - Rugged Armortex (Kevlar blend material) pads covering flights abrasion - Zipper for easy on and off - Active Airflow: 4 layer ventilation system - Technical back mesh for breathability - CE 1621-1 certified to ensure outstanding protection

Our Pro-X3 line is designed for every rider in mind, from beginners to veterans and anyone in between. G-Form's industry leading SmartFlex protection is flexible as you ride, yet hardens on impact in the event of a crash. And SmartFlex pads are fully waterproof, so machine wash them as needed. - Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort, and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage

- Body-mapped, impact-absorbing SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Ventilated SmartFlex hip pads allow airflow to keep wearer dry and comfortable - 4+ hour chamois to remain chafe-free (Not included on youth) - Moisture-wicking, UPF 50+ compression fabric - Side leg pocket - Women's short liner has high waist, yoga-style waistband, and longer inseam for a more comfortable fit - Machine washable - CE PPE II—15613 Impact Attenuation / 1621-1 coverage

Finally, long pants with impact protection! Compression MoistureCool material with flatlock stitching and mesh ventilation ensures a comfortable fit and premium protection. Offering protection of the hip, upper hip, thigh, and coccyx (removable), these pants score a total of 17 points in the Leatt protection rating system. Now you will return home with a smile on your face after every ride, even after a crash. - 3DF padding is CE tested and certified as impact protection: Hip EN1621-1 Level 1 - Extra-wide with comfortable waist stretch - Anti-odor MoistureCool and AirMesh wicking fabrics - Silicone-printed elastic leg cuffs - Pre-shaped 3D design for better fit and function

This hard-shell, extended-length knee and shin guard with soft 3DF impact foam promises comfort paired with premium protection. It's a great product for all soft knee pad users who are tired of ripping their shins but are still looking for a soft knee pad feel. Now with a slimmer knee pad profile, a ventilated and perforated sleeve, and a newly integrated silicone coated thigh strap for that solid fit with ergonomic left/right shapes. 3DF AirFit impact foam offers a soft and flexible fit, yet instantly transforms into a harder, energy-absorbing protector upon impact. These pads are CE tested for certified protection that scores a total of 19 points in the Leatt protection rating system. - Abrasion-resistant Aramid outer layer for durability - Anti-odor MoistureCool and AirMesh wicking fabrics - Our 3D design ensures a great fit that is very comfortable - Slim shin plate that also fits inside boots - Weight: from 700g (1.54lbs) pair CE tested and certified as impact protection - Knee and shin: EN1621-1 - Full shin extended length: EXT

The Fusion 2.0 Junior was designed specifically for young riders who are looking for all-in-one body protection. Made of 3DF AirFit soft impact foam that offers ventilation, the Fusion 2.0 Junior’s 3D design will fit comfortably. This soft foam, however, absorbs energy upon impact to take those knocks. For added protection, it has a built-in neck brace structure made of fiberglass-reinforced polyamide resin that is engineered to snap off in an emergency. It also has a collarbone cut-out that assists in protecting your fragile bones. CE tested and certified as Personal Protective Equipment and impact protection, it protects your chest, back, shoulders, and flank regions. - Number plate clip-in function - CE tested and certified as Personal Protective Equipment 89/686/EEC - Flank protection - Engineered fracture point on rear thoracic strut designed to snap off in an emergency - Collarbone cut-out helps to protect your most fragile bones - Neck brace structure made of fiberglass-reinforced polyamide resin - Easy-to-use, no-tool sizing adjustments and three-dimensional design for perfect fit - Junior Fit: S/M – XXL (105 – 165cm)

- Engineered collarbone cut-out to keep your helmet rim away from your most fragile bones - Composite matrix platform allows for the most efficient reduction in neck forces - Optimal helmet rim striking platform is designed to redistribute neck forces and provides the helmet with freedom of movement - CoreFlex split rear folding thoracic strut is designed to work with the body's natural movements for a more comfortable fit - Adjustable, Four-angle Thoracic strut engineered to break away before applying excessive pressure to the back - Sliding front and rear SureFit adjusters offer Three-way adjustability for that perfect fit - Sculptured, split front for improved comfort and fit - Low profile push-button open/closure system - Easy-to-use emergency release mechanism - Injected, durable and easy-to-clean foam padding - CE tested and certified as Personal Protective Equipment 89/686/EEC - Weight: from 790g (1.74lbs)

LIGHTWEIGHT HARDSHELL WITH IMPACT FOAM The 3.5 Body protector is a new product for 2022, it comes in 2 pieces, there is a zip up compression suit with built in shoulder and elbow impact protectors and also a height adjustable kidney belt. Then a hard-shell CE certified chest and back impact protector is used over the top. This modular system will not only give you the most protection but also great ventilation and comfort. This new concept is very easy to take on and off, which is a relief after a full day's riding and makes cleaning up super easy, works with or without a Leatt Neck Brace. Has a Leatt protection score of 17, if you are looking for something with even more protection including the flank take a look at the 6.5 body protector. - Total Leatt protection score of 17 points - Hard shell and 3DF AirFit ventilated soft impact foam - CE tested and certified as impact protection: - Chest prEN1621-3 Level 1 - Back EN1621-2 Level 1 - Elbow and Shoulder EN1621-1 - Our 3D design ensures a great fit that is comfortable and low profile - Separate Anti-odor modular central zip-up compression sock with built in elbow and shoulder protection designed for maximum airflow, evaporation and ultimate comfort - Kidney belt with height adjustability for best body fit - Meets FIM requirements - FFM-French Motorcycle Federation Certified - Removable front and rear plate function and BraceOnTM neck brace fitting system for over / under shirt Leatt neck brace fit - Unisex Fit: S-XXL 160-196cm 5ft3"-6ft 5"

All new for 2023 is the 2.5 Chest Protector, it is lightweight and offers a hard-shell roost guard for the chest with a CE certified impact protector for the back. The 3D design and adjustable waist straps offer a close, slim fit that is comfortable and well ventilated, removable plates in the front and rear mean it can work with or without a Leatt neck brace. Has a Leatt protection score of 5 out of 25, the next step up in chest protection level is the 3.5 that offers impact protection for the chest also. -Total Leatt® protection score of 5 points -Lightweight hard shell and 3DF AirFit impact foam for the back -Extended back protection -CE tested and certified as impact protection: -Back EN1621-2 Level 1 -CE tested and certified as roost protection: -Chest EN14021 -3D design ensures a comfortable, great fit -Padded base layer -Close fitting allows for over or under the jersey use -Removable front and rear plates and BraceOn™ system allows over and under the shirt Leatt® neck brace fit

- Knee/elbow pad combo pack in a mesh bag - Available in multiple kid-approved designs

Protector Shirt Zip

The Leatt DBX 3.5 neck brace is lightweight, has an adjustable rear thoracic strut, and is super stylish. This makes the 3.5 a great buy. The brace is designed to reduce forces during an accident and transfer them through the brace into the strong muscles of the body, rather than the small fragile bones in the neck. Feel protected and ride with confidence. Independent off-road motorcycle study by Great Lakes EMS Inc (Action Sports EMS) show that neck braces offer: - Up to 89% reduction in critical cervical spine injuries - Collarbone injuries up to 45% MORE likely WITHOUT a neck brace Specs - Independently lab- and rider-tested, proven to reduce neck forces and neck injuries - Engineered collarbone cut-out to keep your helmet rim away from your most vulnerable bones - Polymer matrix platform allows for the most efficient reduction in neck forces - Optimal helmet rim striking platform is designed to redistribute neck forces and provides the helmet with freedom of movement - CoreFlex split rear thoracic strut is designed to work with the body's natural movements for a more comfortable fit - Adjustable Thoracic strut engineered to break away before applying excessive pressure to the back - Sculptured, split front for improved comfort and fit - Airflow ribbed body padding for optimum ventilation - Free, optional clear chest strap included - CE tested and certified as Personal Protective Equipment 89/686/EEC - Weight: 497g (1.1lbs)

- Removable LITESHIELD PLUS back protector (EN 1621-2, level 2) - Protective EVA padding on the upper back and coccyx - Height-adjustable AIROFLEX hip belt with anti-stick Velcro - Odour prevention: treated with Polygiene Odor Crunch - Machine washable

Our super-light Kids Transition pads are designed for the little rippers out there that ride scoot or pedal bikes. The Kids Transition pads mould with body heat to provide maximum comfort with a breathable mesh back panel to wick moisture away from the skin.

- Custom diecut removable D3O XTI Mesh foam pad provides impact protection. - Mesh sleeve fabric for breathability and comfort. - Silicone gripper plus hook and loop strap closure for a secure fit. - Abrasion-resistant elbow cover for durability.

- Removable D3O T4 Trio foam pad provides impact protection. - Mesh sleeve fabric for breathability and comfort. - Silicone gripper plus hook and loop strap closure for a secure fit. - Abrasion-resistant elbow cover for durability. - Unisex size range

- A Kydex pierce-proof layer and a removable D3O LP1 pad provide certified impact protection. - Durable TPU skid plate for sliding during crashes along with a ripstop knee cover for abrasion resistance. - Stretch mesh rear panel with an integrated perforated elastic above the calf for a secured fit. - Ariaprene body fabric is highly breathable and a sustainable alternative to neoprene. - Foam padded side walls offer additional coverage. - Silicone gripper print inside top opening to prevent slippage. - Unisex size range.

The Flow light pads are the ideal option if you are looking for super thin, light and comfortable protectors. These pads are designed to be compact to fit in any backpack. The integrated Xmatter padding concept provides high impact absorption and protection, and the light weight mesh slip on sock concept adds a high level of comfort when pedaling and heat is your concern. The Flow light guards also allow you to remove the padding should you need to throw the sleeve in the wash or replace padding which has lost its structural integrity. - Removable Xmatter protective foam - Lycra mesh—light, moisture wicking, breathable, anti-bacterial - Silicone stopper - EN1621-1:2012 certified

7iDP Transition Knee Shin Pads EXTRA PROTECTION Without compromising mobility the Transition Knee Shin pads offer an extra 5 inches of shin protection in a super-light package. Along with the side knee protection you'll be ready for any trail. COMPRESSION FIT Designed to keep weight down the compression fit, the slip-on design fits higher on the thigh than most pads. An internal silicone strip keeps the pads from slipping down. BREATHABLE SOCK Running the length of the pad in the rear and extending across the lower front a breathable 4-way stretch mesh maintains airflow for all-day comfort. - High length compression design to prevent pad from slipping - Extra shin and side knee padding for increased protection - Silicone printed gripper on inside of cuffs - Silicone printed logo on top outside cuff to grip silicone on to shorts - Mesh back for increased airflow - Certified CE EN 1621-1:2012 Level 2 - Pre-curved fit for ultimate comfort - Weight 340 grams (Size L)

The Mission Elbow guards are built to handle epic all-day trail riding. Durable, lightweight, and ergonomically designed for climbing and descending, Mission armor lets you focus on the task at hand. Features: - Flexible Shock Absorbant PU Padding - Breathable mesh back panel - Non-slip bands (top & bottom) - Machine Washable - 3 Year Warranty

This hard-shell design with 3DF impact foam offers great protection, now with a new, slimmer knee pad profile and improved sliding surface. The ventilated, perforated sleeve and integrated silicone-coated thigh strap also promise a solid fit with ergonomic left/right shapes. CE tested for certified protection that scores a total of 20 points in the Leatt protection rating system. - Hard-shell and new 3DF AirFit ventilated soft impact foam - Anti-odor MoistureCool and AirMesh wicking fabrics - Soft edges offer superior feel and comfort - 3D design for optimal fit with specific left and right sides - CE tested and certified as impact protection: Knee EN1621-1 - Weight: from 500g (1.1lbs) pair

- All Mountain to DH perfect for comprehensive protection at an affordable price - High impact protection featuring D30 T5 material which hardens upon impact yet flexes while riding - D30 T5 insert behind tough panels is EN 1621:1 rated

Designed for ultimate comfort and function, this super slim CE-certified AirFlex body protector will give you confidence to take on new challenges. Featuring level one back, shoulder, and elbow protection, as well as a chest pad, the Airflex Stealth body protector has you fully covered. The ergonomic fit is achieved thanks to high tech Airflex technology. The vest has a full-length zip for easy fitting and works with or without a Leatt Neck Brace. CE tested and certified as impact protection: - Back EN1621- 2 Level 1 - Elbow and Shoulder EN1621-1 - AirFlex ventilated soft impact gel - Stealth, super-slim ergonomic design - Full-length compression zip - Superior ventilation using MoistureCool and AirMesh wicking fabrics - Our 3D design ensures a great fit that is very comfortable - BraceOn neck brace fitting system - FFM—French Motorcycle Federation Certified - Easy to clean: hand wash - Weight: from 750g (1.6lbs) - Unisex fit: XS-XXL-154-196cm-5ft-6ft 5"

The Bluegrass Skinny D3O® knee pads are the go-to choice for our rider's shredding stages of the Enduro World Series. Breathable fabric and light overall weight ensure they can keep pedaling hard to the end of the ride. - D3O® Technology - Protectors compliant with EN 1621-1, Level 1 - Silicone grippers - Extended sleeve - Strong, durable Kevlar fabric - Breathable Laminated fabric

We developed the Bluegrass Solid D3O® elbow pads to be as adjustable as possible to avoid the pain of arm pump without losing stability during the ride. With D3O® shells and extra soft pads at the sides, the Solid D3O® provides protection and comfort. - Protectors compliant with EN 1621-1, Level 1 - D3O® Technology - Side soft pads - Extended sleeve - Silicone grippers - Top and bottom straps - Strong, durable Kevlar fabric - Breathable Air Mesh fabric

The Bluegrass Seamless B&S D3O® offers an experience unlike any other: unparalleled breathability, next-level comfort, and the ultimate protection. Designed for trail riding, enduro, and longer rides on your E-Mountain Bike. - 80% Polypropylene, 10% Polyamide, 10% Elastan - Seamless construction ensures adherent and ergonomic fit - Unisex fit to accommodate all body shapes - Dryarn® microfiber guarantees the highest level of performance for next-to-skin fabrics - Open mesh enhances ventilation and sweat evaporation - Quick-drying microfiber works to regulate body temperature - Dermatologically tested microfiber to eliminate bacteria and odor - Back protector D3O® BP4 L1 (removable) - Shoulder protectors D3O® T5 EVO X L1 (removable) - D3O® inserts compliant with EN 1621-2:2014 - Stable shoulder shells compatible with backpack straps - Two rear pockets for snacks and soft items - Lightness and flexibility gives you freedom of movement - Long-length bottom to be dressed into the pants maximizing stability - Hand wash only. Use only mild soap and water to clean your protector.

The Bluegrass Armor Lite is the perfect choice for riders who prefer lighter gear under their jersey. During long pedaling sections, you’ll feel as if it’s not even there. Armor Lite offers the right balance between flexibility and freedom of movement. - 3-Layers EVA full back protector - Stretch Mesh ergonomic fabric - Open mesh breathable and ventilated fabric - Slim-fit construction - Hydro pack compatible (1L capacity) - Three rear pockets - Neck brace compatible - EN 1621-2 Level 1 certified

Bluegrass Skinny elbow pads are the perfect choice for those having fun on trails. The Bluegrass pads have an extended sleeve to add a little extra stability to the fit, and to prevent having to pull them back into place mid-ride. - Two-layer protection - Extended sleeve - Silicone grippers - Elastic band - Breathable fabric - Certification CE 1621-1:2012 Level 1

- Our lightest ever elbow pad with new revolutionary IPX soft gel protection - Lycra sock sleeve with IPX gel for maximum freedom-of-movement when riding - Perfect for day-long riding - Low bulk and easy to fold for storage in the pack when not in use - Ventilation hole for added comfort - Certified to EN 1621-1 Level 1 - 64% TPE, 28% polyamide, 8% polyester

- Protective padding for outer ankle bone - Sold in pairs

Super Light Minimalist design keeps weight low and a slim profile means the Transition elbow pads can easily go unnoticed under a jersey. Internal silicone strips combined with a compression fit mean the pads form closely around the upper and forearm giving a consistent non-slip fit. Breathable The breathable 4-way stretch mesh runs the full length on the inside of the pads keeping free from moisture build-up. - High length compression design to prevent pad from slipping - Silicone printed gripper on inside of cuffs - Mesh back for increased airflow - Tested beyond CE EN 1621-1:2012 Level 2 - Pre-curved fit for ultimate comfort - S: S: 8''-10'' (20-25cm), M: 10''-12'' (25-30cm), L: 12''-14'' (30-35cm), XL: 14''-16'' (35-40cm) - Take measurement from the widest part of the bicep - Weight 245g (size L)

- Removable D30 high-performance shock absorbing protective foam at hips - Butterfly mesh throughout ensures a second skin fit to keep targeted hip protection in place - Highly durable mesh panels at inner thigh ensure maximum venting - Custom heat-moulded foam at outer thighs offers additional protection against knocks and bumps - Flatlock seam finish ensures mobility and comfort through the rider's full range of motion - High performance, Italian-made chamois with triple-density foam, rapid sweat absorption technology, anti-bacterial properties, and Eschler top fabric - Soft brushed Boxer Style elastic waistband - Custom elastic leg hem holds the short in place - Inner lower leg opening features 'slip panel' designed to glide over protection

The Carve models manage without hard shells and are therefore light and extremely comfortable to wear. They are ideal for somewhat harder use and, with the integrated Xmatter padding concept provide high impact absorption and protection. With the Carve Evo+ iXS introduce product properties like exchangeable padding, structurally improved AeroMesh of newest generation offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - AeroMesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified - Adult-sized

The Carve models manage without hard shells and are, therefore, light and extremely comfortable to wear. They are ideal for somewhat harder use and, with the integrated Xmatter padding concept, provide high impact absorption and protection. With the Carve Evo+, we introduce product properties like exchangeable padding and the newest generation of structurally improved AeroMesh, offering a higher level of comfort and structural strength. - Xmatter protection foam (exchangeable) - AeroMesh, light, moisture wicking, breathable, anti-bacterial, added structural strength, high level of comfort - LoopLock closings - Silicone gripper - Certifications: EN1621-1:2012, EN14362-1:2012, EN14362-3:2012, PFOS/PFOA (SGS Taiwan Ltd.) - Material composition: 40% Polyester, 25% PU, 15% Nylon, 15% Kevlar, 5% EVA

The Carve EVO+ guards are light and extremely comfortable to wear. These guards are ideal for more demanding use due to the integrated Xmatter padding that allows for high impact absorption and protection. With the Carve Evo+ we introduce product properties like exchangeable padding, and structurally tough AeroMesh that offers a high level of comfort and structural strength. - Xmatter protection foam (exchangeable) - Low friction impact shells to absorb and distribute impact - AeroMesh light, moisture wicking, breathable, anti-bacterial - LoopLock closures - Silicone stopper - EN1621-1:2012 certified

The Hack Evo+ guards are our starter option for soft protectors. They combine the characteristics of the Flow and Carve series cost-effectively. These guards are light and extremely comfortable to wear. - Qmatter, protective padding - Silicone stopper - AeroMesh- light, moisture wicking, breathable, anti-bacterial - EN1621-1:2012 (L1) - Available in youth sizing

With the Flow Evo+ elbow guard, iXS provides super thin, light and comfortable elbow protectors. Developed with mountain bike legend Hans Rey, the pads are super compact to fit any backpack. The integrated Xmatter padding concept provides high impact absorption and protection. With the Flow Evo+ iXS introduce product properties like exchangeable padding and structurally improved AeroMesh of the newest generation, offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - Aeromesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified

The Hack Evo guards are our entry-level option for soft protectors. They combine the characteristics of the Flow and Carve series cost-effectively. These knee guards are light and extremely comfortable to wear. - Qmatter, protective padding - Low friction impact shells to absorb and distribute impact - Silicone stopper - AeroMesh light, moisture wicking, breathable, anti-bacterial - EN1621-1:2012 (L1)

Freeride legend Darren “The Claw” Berrecloth demands the best when it comes to his equipment. iXS’s Dagger Knee Guards were developed with input from The Claw, so they have everything you need when you’re pushing the envelope. Specially designed for gravity applications, the Daggers are loaded with thoughtful, high-tech features for a perfect fit with next-level protection. The AeroMesh material is lightweight and extremely breathable to help keep your legs cool and dry, even on hot summer days. And, it’s antimicrobial so it doesn’t absorb odor. Silicone strips inside deliver a no-slip fit, and iXS’s LoopLock closures provide compression with maximum security. Key Technologies: - Armadillo Duo: Dual-compound hard shells provide skid and puncture protection while remaining flexible - SqueezeBox: Patented shell linkage allows for full articulation without sacrificing protection - Knee Gusset: Internal padding around the patella locks protector in position and distributes impact forces around the knee - AeroMesh: Lightweight and anti-bacterial treated 3D performance mesh, optimized for breathability and moisture wicking

Leatt's soft-shell 3DF impact foam elbow pads just keep getting better and better. Now with a refined sleeve construction with the latest material tech, these pads offer ventilation, great fit, and anti-slip features, while providing premium protection. It's CE tested and certified protection that scores a total of 11 points in the Leatt protection rating system. - 3DF AirFit ventilated soft impact foam - CE tested and certified as impact protection: Elbow EN1621-1 - New anti-slip forearm X-strap with silicone bicep lining - Abrasion-resistant Aramid outer layer for durability - Anti-odor MoistureCool and AirMesh wicking fabrics - Pre-curved design for better fit and function - Silicone printed elbow grip - Weight: from 350g (0.77lbs) pair

The Omega Knee/Shin/Whip Pad uses a lightweight, breathable, and compressive Lycra with Kenesio bands and multiple Sharkskin neoprene grippers to keep the pad firmly in place without the need for straps. - Kevlar front section with breathable perforated compression Lycra - SAS-TEC lightweight inserts with extreme impact absorption properties - Incredibly lightweight and extremely breathable design for uncompromised performance - Combo design offers full shin protection - Extra side impact padding - Compression technology, with printed Kenesio bands to combat fatigue and muscle failure - Sharkskin gripper on the top and bottom and inside to hold the pad in place and prevent slip - Sold as a pair - Protection Area: Knee/Full Shin - Pad Type: Hard Shell over Foam