Other

• Forged alloy construction • Center mount design • 285mm w/top plate • Cut to length • Foot boot included

- Proofide is the only substance that should be used to care for all Brooks Leather Saddles - A new saddle should be treated with Brooks Proofide leather dressing to help assist the breaking-in process - Proofide keeps the leather supple as it is specially formulated from natural ingredients to condition, preserve and shower proof the saddle

- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips and other damage to your frame, toptube, downtube, chainstays and cable rub areas - Extra wide downtube pieces to cover wider E-Bikes - Durable, weatherproof 3M adhesive - 45-piece pack will fit most E-MTB’s with wider down tubes

Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 2 large and 2 medium patches - 3 small frame protectors - 2 large frame protectors

Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - For bikes without factory mounting plate (includes top plate and bolt) - 285mm (for bikes 22" and under) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips and damage to your cranks - Durable, weatherproof 3M adhesive - 2-piece pack is designed to fit most cranks

- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips, cable rub and other damage to your forks - Durable, weatherproof 3M adhesive - 8-piece pack is designed to fit most front suspension forks

- EverClear Roll is 12 micrometers (µm) thick and offers 2 x 60-inches of high-quality protection film - It's designed to protect your frame against anything from rock chips to cable rubs and everything in-between. - Included is a sheet large enough to cover your down tube, top tube, chain-stay, cable rub points and crank arms. Also works great for fork lowers, shock bodies, and more! Especially great for protecting carbon frames or decals. - It’s easy to cut and apply—simply trace and cut your desired pattern(s), clean your surface, and apply where necessary! - Want to boost re-sale value of you bike? EverClear is your ticket! By applying this stealthy 12µm protection to your frame when it’s new, you can preserve that new look without using any bulky and ugly frame protection. Then, when it’s time to sell, you can remove the EverClear, and you are left with a beautiful like-new bike that’s ready to get top dollar in re-sale. - Made in the USA

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

- Lightweight and durable alloy construction - Fully adjustable length from 24''-29'' - Allen bolt locking mechnism

The Ursus MOOI R90 Adjustable rear-mount integrated kickstand (40 mm PLATE) is an alloy kickstand and has the capacity to hold up to 55 lbs. URSUS MOOI is ideal for bicycles that are compatible with an integrated mount at the rear dropout - 40mm center to center two-bolt mounting. The adjustable tool-free kickstand features a button that allows you to set the perfect length for your bike. Intended for bikes with an 40mm integrated mount at the rear dropout. 55 lbs capacity. Made in Italy. Intended for bikes with an integrated mount at the rear dropout, this ultra-stable kickstand with an adjustable length will keep even the most stubborn bikes upright. Installation is quick and easy and the adjustable length works for bikes with wheels from 24-inch wheels all the way to 29-inch wheels. Compatible with Trek and other bikes designed with direct mount 40mm mounting holes on the rear chainstays.

Keep your handlebar organized and your devices secure with the SpaceMount Clamp from Minoura. - Single action multipurpose clamp fits almost anywhere on the bike - Small: red logo, 22mm–29mm clamp diameter - Medium: black logo, 28mm–35mm clamp diameter - Alloy body and stainless steel lever - Clamp body has one (1) M5 thread hole in center

- Sturdy 5mm steel plate construction - Provides stability for adult riders - Fits 20-inch to 26-inch wheel bikes - EN71 and EN14765 test approved - 6-inch steel wheels for increased stability - Weight Limit 220lb / 100 kg

For the rider who wants to protect the high-risk downtube region of their frame. Perfect for preventing acute damage and wear and tear on the downtube. Downtube protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the downtube of the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, and other elements while out on the trails and shuttling. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Matte clear film - Fits all makes, models, and sizes - Designed around mountain bike geometry - The Essential Downtube Kit includes protection for downtube and extra pieces to provide approximately 10% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

For riders looking for comprehensive coverage to protect high risk areas of a dual-suspension eMTB frame. Bike protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, cable rash, heel rub, chain slap, and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Fits all makes, models, and sizes - Designed around e-mountain bike geometry - Designed for maximum coverage with minimal trimming - The Covered Dual Suspension eMTB Kit includes protection for toptube, downtube, 4 stays, seat tube, and extra pieces to provide approximately 60% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

Ursus KING EVO R78 Adjustable rear-mount integrated kickstand (18 mm PLATE) is an alloy kickstand and has the capacity to hold up to 75 lbs. URSUS KING EVO is ideal for bicycles that are compatible with an integrated mount at the rear dropout - 18mm center to center two-bolt mounting. The adjustable tool-free kickstand features a button that allows you to set the perfect length (263mm - 333mm) for your bike.  Intended for bikes with an integrated mount at the rear dropout, this ultra-stable kickstand with an adjustable length will keep even the most stubborn bikes upright. Installation is quick and easy and the adjustable length works for bikes with wheels from 24-inch wheels all the way to 29-inch wheels. Compatible with Trek and other bikes designed with direct mount 18mm mounting holes on the rear chainstays.

The Handlebar Bag Foam Spacer Kit bumps a bag 3/4" forward of your handlebars, allowing for excellent access to all your favorite resting positions on your ride. Highly recommended for use with the Zeitgeist Pack, the Catalyst Pack, the Kestrel Handlebar Bag and the Bandito Bicycle Bag. With this Handlebar Bag Foam Spacer Kit, you don’t have to forfeit access to the flats of your handlebars when you use a handlebar bag. What’s more, the Handlebar Bag Foam Spacer Kit can extend the life of your bag by eliminating abrasion from the bolts on most stems. Our Handlebar Bag features two 9" polyurethane Swift Straps. We love these amazing straps because they grip the handlebars and keep your bag in place. You can adjust the distance between your handlebar bag and your bars by adding to the stack of foam blocks. Each kit includes 6, 1/4" thick high-density foam spacers. Features: - 6 individual spacer blocks allow you to choose the optimal space for your hands - Swift Straps grip the handlebars and prevent the bag from slipping

Introducing the Piston® Pro X LICENSE PLATE MOUNT. Simply remove the endcap, and attach the mount to achieve unparalleled visibility on the road. Upgrade your ride and hit the road with confidence and style. - For use with Piston® Pro X - Billet machined aluminum - Rotates for use in stowed or in-use position - Black Anodized

The Seltzer mount is designed to carry a standard bottle cage and two threaded CO2 cartridges, in a clean and compact way. - Holds one standard bottle cage - Accommodates two threaded CO2 cartridges, up to 25g - Can be separated and installed directly to bottle cage mounts on frame - Includes seatpost adaptor and bottle cage bolts - Bottle cage and cartridges sold separately

Designed for bartenders, homebrewers, and the kind folks who pour our delicious cold-brew coffee, the Problem Solvers Pedal to Tap Handle Adapter allows thirsty cycling enthusiasts to top their favorite tap handle with the bicycle pedal of their choice. - Works with standard 3/8" tap handles and 9/16" pedal spindles - Two configurations, both labeled with "L" or "R", for compatibility with left and right-hand-threaded pedals - Aluminum construction - 20 TPI

Who knows more about dog attacks that the mailman? Letter carriers have had to deal with aggressive dogs since Claudius Polonius was delivering rolls of parchment to citizens of the Roman Empire. So what do the experts use to repel dog attacks? Well, the U.S. Postal Service has been using Halt! Since 1966. You might say they have been conducting field tests for over forty years. Halt! Products use Capsaicin, a naturally occurring extract of peppers, which, when sprayed in a dog's face, causes only temporary, but extreme discomfort for the dog. Think of it as attitude re-adjustment. Halt! Stops dogs in their tracks, giving you time to move out of danger. Halt's pressurized spray is accurate up to 10 feet.

- Chainstay mount kickstand for oversized or suspension frames - Made of alloy - Adjustable with lockscrew - Fits bikes from 20-inch to 700C wheels

Protect your frame from impacts, nicks, and scratches. - A clear self adhesive frame protector film (roll) - Roll size: 50mm x 1.5m x 0.2mm (thick), 2" x 60"

Ursus Easy Rear Mount Adjustable center-mount kickstand has the capacity to hold up to 55 lbs. Tool-free adjustment allows you to set the perfect length for any bike with 26"-28" wheels.

Aluminum Direct Mount kickstands in KSA 18mm. These kickstands only work with bike frames designed for these kickstand standards. KSA 18 has two bolt holes 18mm apart. - 320mm long (Trim to optimize fit) - Black or Silver - Bolts included KSA 18 fits many Giant and Liv models: - Seek - 2013-2016 - Roam - 2013-2018+ - Rove - 2013-2018+ - Enchant - 2017+ - Escape Disc - 2017+ - BeLiv - 2018+ - BeLiv City - 2018+ - ATX - 2018+ - ARX - 2018+ - FastRoad 2017 - AnyRoad Adv - 2018+ - Talon- 2018+ - Alight- 2018+ - Tempt- 2018+ - Thrive- 2018+ - Sedona DX- 2018+ (Does NOT fit Sedona or Sedona W)

Small PVC top tube protector. Helps protect your top tube if your drop bars spin into your frame in a fall. Fits 1-1/8" top tubes. Note: To ease installation soften the PVC by heating with a hair dryer or place it in very hot water for a few minutes. - Modern, minimalist top tube protector - Easy on-and-off installation

For riders who are carrying their bike over the tailgate of a truck. Even with a tailgate pad, which is designed to protect the vehicle and not the bike, damage will occur on the downtube when shuttling without protection. The Shuttle Armor is designed to protect the downtube during transport on the roughest access roads. RideWrap protection accessories are made with high-quality RideWrap materials that are bike-tested for long-term durability. All RideWrap protection accessories have been designed to give riders leading protection for their dollar. - Matte black finish - Fits all makes, models, and sizes - Protects from harsh tailgate rub - Designed around mountain bike geometry - Kit includes instructions and pre-install cleaning wipe

Protect your chainstay and other wear areas from harsh chainslap and other frame damage maintaining your bike's strength and beauty. The rubberized strip is 50mm wide and each roll is 1000mm long. Wrap up the stay or trim a custom shape to protect the frame. RideWrap protection accessories are made with high-quality RideWrap materials that are bike-tested for long-term durability. All RideWrap protection accessories have been designed to give riders leading protection for their dollar. - Matte black finish - Fits all makes, models, and sizes - Protects from harsh chainslap and other damage - 50mm x 1000mm roll - Designed around mountain bike geometry - Kit includes instructions and pre-install cleaning wipe

Greenfield's Stabilizer Rear-Mount Kickstand attaches to the rear chainstay of the bicycle so it's perfect for bikes that won't accept regular kickstands like mountain bikes. It comes complete with an extra wide rubber foot for superior stability and won't interfere with pedal action or rear derailleur cables. This is the stand of choice for law enforcement bike patrols throughout the U.S. - Fits tube sizes up to 7/8" in diameter - Certified Non-Corrosive Casting - Snap Action Mechanism - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)

Keep your investment protected with durable armor designed specifically for your ride. - Protection engineered to keep your ride looking as good as new for years to come. - Trek protective armor - Model-specific custom fit

Converts quill style forks to use threadless stems.

Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.

- Alloy construction - Push button adjustment - Fully adjustable length - -Includes: top plate and 2-bolts (1-hex, 1-Allen)

Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.

Show some Fox brand loyalty with a Fox Victory sticker on your stuff.

- Lightweight and durable alloy construction - Fully adjustable length from 24''-29'' - Allen bolt locking mechanism

This kit includes a Greenfield center-mounted kickstand as well as a mounting plate that's designed with a cutaway to clear derailleur cables. The kickstand is lightweight, durable, and looks great on any bike. It's made of aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

Keep your investment protected with durable armor designed specifically for your ride. - Protection engineered to keep your ride looking as good as new for years to come. - Trek protective armor - Model-specific custom fit

- For mounting a bottle cage to 22.2mm handlebars - Bottle cage not included

A modern halftone camo pattern that looks great on dark and light bikes alike! Frame protection is clear so your frame will be visible. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.

Replacement part

Ursus JUMBO KICKSTAND (300mm length): Finally, a no-hassle kickstand that does the job of holding up your bicycle! The Ursus Jumbo 80 Kickstand features a double legged center-mount design that's strong enough to stabilize your bike up to 100kg. Ursus Jumbo kickstand is ideal for electric bikes as well as overloaded touring or commuter bikes. If you ride with a children's seat on your bicycle, URSUS Jumbo Kickstand is a must-have item to keep your bicycle from tipping over when you stop at the park or the ice cream parlor with your child. 300mm length.  Weighs 1180 grams. Made in Italy. Comes with an assembly kit that includes alloy plate, conical washer, 4 bolts (75mm, 65mm, 40mm, 22mm). Select the correct bolt length for your bicycle.

Everybody knows you can't really shred without a solid power stance. The Power Stance kickstand is the whammy bar of kickstands. Take your city shred session to the next level when you slam down the Power Stance. WEOW WEOW! Built with e-bikes, cargo bikes, touring bikes and commuters in mind, the Power Stance is incredibly sturdy. The length is adjustable by the push of a button for quick installation and easy adjustment if parked on uneven ground. Lean easy for years to come with the ultra burly Power Stance kickstand. - Center mount version is compatible with almost any adult bicycle - Burly construction is great for supporting heavy bikes - Adjust the length with the press of a button - Durable composite foot - Lifetime PDWarranty

Park's Digital Scale accurately weighs bikes, frames and components. It measures in both pounds and kilograms to the tenth and includes a dual-position, silicon-coated hanging hook. Plus, its unique design allows it to be clamped solidly in a repair-stand and hung from a hook.

- Compatible with 70cc and 100cc pumps - Glass reinforced nylon with stretch polyurethane strap for secure rattle-free storage - Mounts to water bottle bosses

Rep your ride with some sweet new Pure Cycles stickers! These sticker packs come with a random assortment of sticker designs and include roughly 4 stickers per pack. Think of it like a grab bag full of stickery awesomeness. Who knows what you'll find! Well you'll probably find stickers but you get the idea: Pure Cycles + Stickers = Awesome BOOM!

Rep your ride with some sweet new Pure Cycles stickers! These sticker packs come with a random assortment of sticker designs and include roughly 4 stickers per pack. Think of it like a grab bag full of stickery awesomeness. Who knows what you'll find! Well you'll probably find stickers but you get the idea: Pure Cycles + Stickers = Awesome BOOM!

The Greenfield RetroKit is a retro-mounting kickstand plate designed with a cutaway to clear derailleur cables. - Fits all Greenfield kickstands and most generics - Made in the USA

This sea gem shines on just about any color bike. Frame protection is opaque so frame will not be visible under Frame Keeper. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.

- Designed to fit most lightweight, midweight, and cruiser bicycles - Fits frames with welded-on mounting plates - Made in the U.S.A.

This eyebolt and nut set for fender-mounting contains 8 stainless eyebolts, 8 stainless nuts, and 8 plastic stay endcaps. This hardware set is used for mounting Chromoplastic Longboards, Bluemels, and Commuter II Fenders.

For the rider who wants to protect the toptube region of their frame. Perfect for preventing damage from knee pads, shoes, bike locks and storage. Toptube protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the toptube of the bike to protect it from knee pads, cleats, and bike locks during storage. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Fits all makes, models and sizes - The Essential Toptube Kit includes protection for toptube and extra pieces to provide approximately 10% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

- Center mount - Made of alloy with steel split rod extension - Adjustable with lockscrew - Fits bikes from 24-inch to 700C wheels

- Fits both 20mm and 35mm rise bars to add some color to your cockpit

• Self locking rear mount design • Fully adjustable length for 26" to 29" wheels • Alloy construction

This pair of Sunlite M5x20 bolts with 6mm spacers is perfect for when components and accessories interfere with each other and additional space is needed. - Makes room for derailleurs, fenders, racks and more - Size: M5 x 20mm w/6mm spacer

This is a replacement rubber leveling foot for your Sunlite E-2 Trainer.

- Highly reflective sticker sheets that contain a variety of different shapes and sizes of stickers - Perfect for frames, helmets, pads, or anywhere you want to add a bit more visibility

- Chainstay-mounted adjustable kickstand - Adjusts to be compatible with 24" to 29" bikes - Large rubber/plastic boot provides a stable stand platform