Stems

- Three offset positions 45/50/55mm - 7075 aluminum with wide 63mm faceplate - Fits 2005>current BoXXer, Fox 40, Dorado, and 2012+ 888 forks - 160g with A2 stainless hardware

- Negative rise stem (-20mm stack height) - 7075 aluminum with wide 63mm faceplate - Fits 2005>current BoXXer, Fox 40, Dorado, and 2012+ 888 forks - 150g with A2 stainless hardware

All Box stems are engineered and crafted using our Oversized Technology. As we follow the load paths down the handlebars we have focused our attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. We’ve done this by moving material from low stress areas. This has greatly minimized twist and contributed to responsiveness. As the stem in mated with the handlebars we have contributed to increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: In this particular model stem we’ve modulated the Oversized formula to emphasize pedaling stiffness. We have transferred material specifically to sectors that experience sudden stress from pulling up on the handlebars. You’ll feel a difference in your acceleration. These stems are engineered for the larger-sized racers. -Material: 6061-T6 Aluminum -Process: Cold-Forged -Hardware: Chromoly Clamping Bolts -Finish: Anodized w/Laser-Etched Graphics Weight: -48mm: 280 g / 9.8 oz -53mm: 290 g / 10.2 oz

The Box Two Front Top is a modern 1-1/8 inch by 22.2mm stem designed specifically for BMX racing. Box Two Top Load stem bodies are cold-forged and CNC-machined from the highest quality 6061-T6 aluminum. The lightweight front clamps are cold-forged and CNC-machined for increased stiffness and strength. -Material: 6061-T6 Aluminum -Process: Cold-Forged -Hardware: Chromoly Clamping Bolts -Finish: Anodized w/Laser-Etched Graphics Weight: -48mm: 234 g / 8.3 oz -53mm: 240 g / 8.5 oz

The Box Two Front Load is a modern, 22.2 stem designed specifically for BMX racing. Box Two Front Load stem bodies are cold-forged and CNC-machined from the highest quality 6061-T6 aluminum. The lightweight front clamps are cold-forged and CNC-machined for increased stiffness and strength. -Material: 6061-T6 Aluminum -Process: Cold-Forged -Hardware: Chromoly Clamping Bolts -Finish: Anodized w/Laser-Etched Graphics Weight: · 48mm: 224 g / 7.9 oz · 53mm: 230 g / 8.1 oz

All Box stems are engineered and crafted using our Oversized Technology. As we follow the load paths down the handlebars we have focused our attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. We’ve done this by moving material from low stress areas. This has greatly minimized twist and contributed to responsiveness. As the stem in mated with the handlebars we have contributed to increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: This particular model stem pushes our Oversized Technology to the extreme as it maximizes the shift of material from low stress zones to the Oversized interface. These stems are engineered for the smaller-sized racers. Weight Limit: Meets or exceeds EN Racing 14765 Standard. FEATURES Oversized Stiff Design Oversized Bar Bore Hollow Cro-Mo Clamping Bolts Front-Load Clamp Design Lightweight 3D Cold Forged Design for Superior Strength COMPATIBILITY Box One XS Fork with 1" Steerer Tube Box One XE Fork with 1" Steerer Tube Hex Lab Carbon OS 4.5" 28.6mm Handlebars Hex Lab Carbon OS 6" 28.6mm Handlebars FAQ My handlebars have a 22.2mm Ø stem clamp area, can I use this stem? No, this stem only fits handlebars with 28.6mm Ø stem clamp area. SPECIFICATIONS 40mm 45mm Clamp (Ø) 28.6mm 28.6mm Material 6061-T6 Aluminum 6061-T6 Aluminum Process 3D Cold-Forged 3D Cold-Forged Rise 5° 5° Stack Height 38mm 38mm Steerer Tube 1" 1" Weight 106 grams / 3.7 ounces 115 grams / 3.8 ounces

All Box stems are engineered and crafted using our Oversized Technology. As we follow the load paths down the handlebars we have focused our attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. We’ve done this by moving material from low stress areas. This has greatly minimized twist and contributed to responsiveness. As the stem in mated with the handlebars we have contributed to increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: This particular model stem pushes our Oversized Technology to the extreme as it maximizes the shift of material from low stress zones to the Oversized interface. These stems are engineered for the smaller-sized racers. -Lightweight 3D Hollow Design -Front-Load Clamp Design to Fight Pull-Up Forces -Large Bar Bore -Large Hollow Clamping Bolts -Superior Strength

All Box stems are engineered and crafted using our Oversized Technology. As we follow the load paths down the handlebars we have focused our attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. We’ve done this by moving material from low stress areas. This has greatly minimized twist and contributed to responsiveness. As the stem in mated with the handlebars we have contributed to increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: In this particular model stem we’ve tailored the Oversized strategy to favor utility and access. The geometry has been altered to allow for easy handlebar removal while at the same time scavenging material from low stress zones. Ideal for those who don’t want to compromise on user experience to gain performance. These stems are engineered for the larger-sized racers.

Hollow stems are cold forged from the highest quality 6061-T6 aluminum available. Featuring an open skeletal design and a dual mid-bolt wedge mounting system, they are lightweight yet maintain a very high level of strength. A 53mm extension stem weighs just 218 grams/7.7 ounces. By removing the rear pinch bolts and moving the mounting bolts to the middle of the stem, we reduced the weight and size and eliminated a serious hazard to the rider’s knees. These stems come with either a 48- or 53mm extension and a 22.2mm bar bore. To ensure proper clamping force, the stem must be mounted on a fork with at least 45mm of exposed steerer tube. Not compatible with forks that have carbon fiber steerer tubes.

The Stacked stem features a taller 6061-T6 construction. - CNC machined logo

This BMX quill stem combines a steel rod with an alloy top. The 4-bolt top clamp securely fastens handlebars.

The BrickTop alloy stem is a classic style, top-mount BMX stem with a 4-bolt handlebar clamp.

The DefendR BMX threadless stem has a AL6061 forged alloy construction and a 4-bolt face clamp. - 30mm stack height - 240g

With its alloy/steel construction and 4-bolt clamp design, the MX is a trusty BMX quill stem. - Quill Length: 4-1/4-inches - Quill diameter: 21.1mm

With its alloy/steel construction and 4-bolt clamp design, the Freestyle is a trusty BMX quill stem. - Hollow-core stem bolt - Quill Length: 4-1/4-inches - Quill diameter: 21.1mm

Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with Bontrager XXX Blendr stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look

The Bontrager Comp 31.8 stem is Blendr ready and provides a secure and confident connection to 31.8 handlebars for road, city, and mountain bikes. - 6061-T6 cast body construction - 4-bolt dual band clamp retains stiffness and reduces weight - Opposing 2-bolt steerer tube clamp with M5 corrosion resistant steel bolts - Blendr ready for seamless accessory integration - Compatible with Blendr Elite bases and Blendr mounts - Suitable for use on a road, city, or mountain bike - Safe for use on carbon steerer tubes and handlebars

An oversized 35mm clamp diameter stem suitable for all disciplines of mountain biking. Oversized strength The Elite 35 stem is the perfect addition to any mountain bikers' cockpit. Forged from lightweight 6061-T6 3D aluminum, the oversized 35mm design offers increased strength and a lighter overall bar and stem system. Product details - Oversized 35mm clamp diameter offers increased strength and minimal weight - 6061-T6 3D forged aluminum construction - Laser-etched calibration marks make dialing in the perfect angle simple and repeatable - Compatible with both Knock Block and standard headsets and spacers - High-strength, corrosion-resistant steel bolts - Approved for use with carbon handlebars

Genuine replacement parts Get back on the road with a genuine replacement stem. For optimal adjustability. - High-quality alloy adjustable stem is compatible with threadless forks - Features 64-degree angular adjustment for a wide range of fit needs - 4-bolt dual band clamp retains stiffness and reduces weight - Blendr ready for seamless accessory integration - Compatible with Blendr Comp & Legacy Elite bases and mounts, sold separately - Other parts are required to install this on a bike, you will be prompted to add the appropriate parts to your cart along with this item

Oversized diameter 35 mm stem accessible to all mountain riders. Oversized and in control Equip your whip with this 35mm Line stem and give yourself the oversized advantage. Forged from 6061-T6 3D aluminum, this 0-degree stem provides the increased strength of the latest mountain-specific bar diameter. Product details - Oversized 35mm clamp diameter provides a new level of strength and weight savings - Forged from 6061-T6 3D aluminum - Laser etched calibration marks make dialing in the perfect angle simple and repeatable - Compatible with both Knock Block and standard headsets and spacers - Knock Block system protects the frame from impacts by fork and handlebars by eliminating over-rotation of bars - Available in a wide range of sizes for today's mountain rider - Safe for carbon bars

Great for road or mountain use, the Elite stem features Blendr compatibility to get you and your accessories in the position you need. Blendr Elite allows seamless accessory integration 4-bolt dual band clamp retains stiffness and reduces weight Opposing 2-bolt steerer tube clamp Uses M5 countersunk, corrosion-resistant steel bolts with 5.2Nm torque spec

Strong, light, and capable The Kovee Pro 35 stem is the perfect centerpiece for cross country race bike. This lightweight stem is optimized for the latest XC mountain bike standard, with a 35mm clamp diameter that combines with a 35mm handlebar to provide a stronger, lighter system. An oversized 35mm clamp diameter MTB stem that offers increased strength and minimal weight - Oversized 35mm clamp diameter offers increased strength and minimal weight - 7075 T73, 3D, forged alloy construction - Laser-etched calibration marks make dialing in the perfect angle simple and repeatable - Compatible with both Knock Block and standard headsets and spacers - Blendr compatible for an elegant, integrated accessory mounting solution - Available in a wide range of sizes for today's mountain rider - High-strength, corrosion-resistant steel bolts - Approved for carbon bars

A light, durable 35mm MTB stem that adds Blendr capability for clean, integrated mounting of lights or computer. Equip your whip with this 35mm Line Pro stem and give yourself the oversized advantage. Forged from light and strong 7075-T73 3D aluminum, the oversized 35mm design offers increased strength and a lighter overall bar and stem system weight. Use with included Blendr base and mount for integrated mounting options for light or computer. Product details - Oversized 35mm clamp diameter offers increased strength and minimal weight - 7075 T73, 3D, forged alloy construction - Laser-etched calibration marks make dialing in the perfect angle simple and repeatable - Compatible with both Knock Block and standard headsets and spacers - Blendr compatible for an elegant, integrated accessory mounting solution - High-strength, corrosion-resistant steel bolts - Includes Blendr mono base, Garmin Mount, and Ion Light Mount - Approved for carbon bars

Strong, light, and capable An oversized 35mm clamp diameter MTB stem that offers increased strength and minimal weight The Kovee Pro 35 stem is the perfect centerpiece for cross country race bike. This lightweight stem is optimized for the latest XC mountain bike standard, with a 35mm clamp diameter that combines with a 35mm handlebar to provide a stronger, lighter system. - Oversized 35mm clamp diameter offers increased strength and minimal weight - 6061-T6, 3D, forged alloy construction - Laser-etched calibration marks make dialing in the perfect angle simple and repeatable - Compatible with both Knock Block and standard headsets and spacers - Knock Block system protects frame from impacts from over-rotation of bars and fork crown - Available in a wide range of sizes for today's mountain rider - High-strength, corrosion-resistant steel bolts - Approved for carbon bars

The forged alloy construction of the Bontrager Pro Blendr Stem delivers stiffness without compromising its light weight or sleek looks. Easy integration of lights, a computer, and more with the Blendr integration system make this stem a perfect upgrade for any bike. - Pro-level quality 31.8mm clamp diameter stem weighs less than many carbon stems - 4-bolt dual band clamp securely holds handlebar - Uses high-quality M5 corrosion-resistant faceplate bolts with 5.2Nm torque spec - Integrate accessories with included Blendr Pro base and Blendr XXX accessory mounts - Mounts intended for use with Ion and Trip, Garmin, GoPro and SRM accessories - Approved for carbon bars and steerer tubes - Safe installation requires 5mm spacer above and below stem - Included Blendr accessories: Pro Mono Base, Trip Computer mount, and High Ion Light mount

An integrated handlebar/stem that delivers aesthetically pleasing performance in a lightweight package. Lust worthy looks, elevated performance Elevate your ride and upgrade to the Bontrager RSL MTB Handlebar/Stem for a super-clean one-piece carbon combo. This OCLV Carbon bar sets the benchmark for lightweight durability, and with Blendr allowing seamless integration of electronics, your cockpit has never looked or performed better. RSL MTB Handlebar/Stem is compatible with both Knock Block and standard type headsets, so there's no excuse not to make the switch to this drool-worthy performance piece. Product details - OCLV Carbon construction is the benchmark for durability and light weight - Compatibility with Knock Block and standard headset types (adapter included) - Seamless accessory integration with Blendr (mounts sold separately) - Shifter and brake lever position lines for spot-on control setup - 40mm trim lines allow for a personalized fit - Titanium hardware is lightweight and long-lasting

Enduro has unquestionably evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wingsuit type accuracy. This Stem was born out of rider's demands for precision and for those moments when you have to be inch-perfect. Taking design elements from our World Cup-winning Direct Mount MK3 Stem and splicing these with our critically acclaimed Enduro MK2 Stem. We developed the Stem specifically with Pro's and Bro's alike. It was obvious we all live for the same challenge of pushing our own limits. As riders, we want a Stem that inspires confidence to change lines through the middle of a rock garden like it's no big deal or slap the inside of a turn and translate all your weight to front-wheel traction. Providing ear-to-ear grins and saying to your mates at the bottom of a trail, "Did you see that?". From the start of the design process, it became clear that we wanted extra rigidity. To yield this, we would need to make the Stem using a forging process - a new thing for us. The result of this allowed us to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance. Another area where we made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. We've vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as we could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition and like every Burgtec product, it's fully CNC machined and anodized in all your favourite flavours. Tested with the world's fastest jibbers and sendiest racers, this stem has everything you need to hit all those rowdy racing lines or pull that little bit harder off that big sender. - Forged and Fully CNC machined from AL6061 – T6 Aluminium - Stainless Steel Hardware - Available lengths - 35mm, 42.5mm and 50mm - Available in both 31.8mm (Black only) and 35mm Clamp - Weight: 35mm 138g, 42.5mm 152g, 50mm 160g

Dakota Roche signature stem. Beefy but slick 1" OD clamping area for extra strength. - Bar Clamp Diameter (mm): 25.4 - Steerer Clamp Diameter: 1-1/8" ins

Cult Redemption stem, for when you want a topload stem but without so much rise. - Wider and beefier than the OG Salvation stem - Improved clamping area - Recessed compression bolt for a clean look - Bar Clamp Diameter (mm): 22.2 - Steerer Clamp Diameter: 1-1/8" ins

Wider and beefier with and improved clamping area and recessed compression bolt for a clean look. - Bar Clamp Diameter (mm): 22.2 - Steerer Clamp Diameter: 1-1/8" ins - Stem Type: Top Load