Riser

Inspired by the BMX bars of yesteryear - 6061 T6 aluminum - Shot peened and anodized black or silver - The 22mm OD crossbar is not there just for strength, but allows installing accessories

- Made from 13-butted 4130 CrMo - Features a welded crossbar

CrMo with internal taper for best strength-to-weight

CrMo with internal taper for best strength-to-weight

- Molded from multi-directional carbon/Kevlar weave for superior strength - Integrated crossbar for exceptional stiffness - Knurled stem clamp area for improved stem grip - Rider weight limit: 135lbs

Answer's Alumilite handlebars provide ample width and rise to fit a 25.4mm stem clamp size. - Weight: 325g - Upsweep: 4° - Backsweep: 8°

Answer's ProTAPER 720 AM is a lightweight, dependable, all-mountain handlebar. It features ProTAPER technology to put added strength in the clamp and rise sections without adding excess weight at the ends of the bar. - ProTAPER Patented Technology (Lighter, stiffer, stronger) - Medium Rise (Bar ergonomics work with all stem combinations) - 720mm Wide (Stability, cut to desired length) - Clamp Diameter: 31.8mm - Rise: 50.8mm - Up Sweep: 4º - Back Sweep: 8º - Material: 6000 series alloy

The ProTAPER 780 DH Expert is everything a downhill bar needs to be – strong, wide, and low. It features ProTAPER technology to put added strength in the clamp and rise sections without adding excess weight at the ends of the bar. - ProTAPER Patented Technology (Lighter, stiffer, strong) - Low rise (Low rider mass) - 780mm Wide (Stability, cut to desired length) - 1-inch rise - Width: 780mm - Clamp Diameter: 31.8mm - Rise: 25.4mm - Up Sweep: 4° - Back Sweep: 8° - Material: 6000 series alloy

Answer's ProTAPER 720 AM is a lightweight, dependable, all-mountain handlebar. It features ProTAPER technology to put added strength in the clamp and rise sections without adding excess weight at the ends of the bar. Cutmarks make it easy to cut to your desired length. - Width: 720mm - Weight: 315 g - Clamp Diameter: 31.8mm - Rise: 12.7mm, 25.4mm, 50.8mm - Up Sweep: 4° - Back Sweep: 8° - Material: 7050 series alloy

The ProTAPER 780 DH is everything a downhill bar needs to be—strong, wide, and low. It features ProTAPER technology to put added strength in the clamp and rise sections without adding excess weight at the ends of the bar. Cutmarks make it easy to cut to your desired length. - Width: 780mm - Weight: 335g - Clamp Diameter: 31.8mm - Rise: 12.7mm, 25.4mm - Up Sweep: 4° - Back Sweep: 8° - Material: 7050 series alloy

These dignified bars immediately step up the appearance of any trail rig. - Width: 780mm - Weight: 335g - Clamp Diameter: 31.8mm - Rise: 1-inch, 1/2-inch - Up Sweep: 4° - Back Sweep: 8° - Material: 7050 series alloy

Slice through narrow trails with Answer's ProTAPER Carbon 720 bar. Perfect for smaller riders or tight trails, the 720's unidirectional carbon layup is durable, lightweight and helps isolate high-frequency vibration for less hand and wrist fatigue. Answer makes these bars using an EPS bladder layup process that delivers more consistent wall thickness, which means you get more bang for your carbon buck, combining greater structural integrity with real weight savings. It's the whole package. - Flat Race bar has 8° of backsweep - 20 x 20 bar has 20mm of rise and 20° of backsweep

Take back control with Answer's ProTAPER Carbon 750 bar. Its unidirectional carbon layup is durable and lightweight, and helps isolate high-frequency vibration for less hand and wrist fatigue. Answer makes these bars using an EPS bladder layup process that delivers more consistent wall thickness, which means you get more bang for your carbon buck, combining greater structural integrity with real weight savings. It's the whole package. - Backsweep: 8° - Upsweep: 4°

Dominate the big mountain lines with Answer's ProTAPER Carbon 810 bar. Gain the leverage and control you need to pilot today's slack mountain frames with 810mm of rock-solid steering. Its unidirectional carbon layup is durable and lightweight, and helps isolate high-frequency vibration for less hand and wrist fatigue. Answer makes these bars using an EPS bladder layup process that delivers more consistent wall thickness, which means you get more bang for your carbon buck, combining greater structural integrity with real weight savings. It's the whole package. - Backsweep: 8° - Upsweep: 4°

Answer's ProTAPER Carbon 720 AM is a lightweight, dependable, all-mountain handlebar. It features ProTAPER technology to put added strength in the clamp and rise sections without adding excess weight at the ends of the bar. Cut marks make it easy to cut to your desired length. - ProTAPER Patented Technology (Lighter, stiffer, stronger) - Internal and External Tapered Walls (Increase strength to weight ratio) - 4° x 8° Geometry (Competition and race proven bend) - Grip Grit area (Non-slip surface)

- Carbon flat bar with unidirectional 12 outer layer carbon - 20mm of sweep and 20mm of rise - White and silver graphics

- Continuous Lay-Up and Curing - One piece Lay-Up creates dense composite layering, consistent material wall thickness - Increased strength for better performance - 15% lighter bars - 780mm width - 145mm Grit Grip finish at bar ends.

All Box handlebars are engineered and crafted using our Oversized Technology. Handlebars have a dual purpose as they contribute to both steering and pedaling stiffness. By strategically varying wall thicknesses and tube diameters we have moved material from 3 low stress areas to zones of high load. This has greatly minimized twist and contributed to responsiveness. Concurrently we have increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar deflection and the consequences can lead to poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: This particular model handlebar is tailored for medium-sized racers so we decided to use hardened aluminum alloy to reduce unnecessary mass. Oversized™ Technology 31.8 Bar Bore 13 Butted Tubing Knurlee Clamping Area Anodized Finish Laser-Etched Logos 6 6.5 7 Clamp (Ø) 31.8mm Material 6061-T6 Aluminum Sweep 7° back, 2° up Weight 447 grams / 15.8 ounces, 465 grams / 16.4 ounces, 480 grams / 16.8 ounces Width 26.6 inches, 27 inches, 27 inches Please note, the maximum recommended rider weight is 100 pounds.

A light and durable mountain bike handlebar with etched guides for easy set-up. A new set of bars Bontrager Comp 31.8 MTB handlebars are a light and durable mountain bike handlebar with etched guides for easy set-up that deliver the look and feel of a performance bar at a value price. Product details: - Single-butted, tapered-wall, 6061-T6 alloy construction - Shot-peened finish increases fatigue life - Laser-etched brake lever position lines for spot-on control set-up - 40mm of cut marks on each side for easy width customization - Bar end compatible

The Line Pro Carbon MTB Handlebar adds strength and saves weight. This trail-tough bar has an oversized 35mm diameter, and it's built with OCLV Carbon so it's strong enough for even the most demanding trails and compliant enough for comfort on long descents and rugged terrain. - Pro-level quality handlebar in oversized 35mm clamp diameter offers increased strength and minimal weight - 27.5mm high rise helps you dial in the perfect hand position - Brake and shifter lever position lines for spot-on control setup - 40mm of cut marks on each side for easy width customization - OCLV Carbon construction is the benchmark for durability and light weight

A 35mm OCLV Carbon handlebar that adds strength, saves weight, and maintains compliance on rugged MTB trails. Pin it to win it The Line Pro Carbon MTB Handlebar adds strength and saves weight. This trail-tough bar has an oversize 35mm diameter, and it's built with OCLV Carbon so it's strong enough for even the most demanding trails and compliant enough for comfort on long descents and rugged terrain. Product details - Pro-level quality handlebar in oversize 35mm clamp diameter offers increased strength and minimal weight - 15mm and 27.5mm rise options to dial in the perfect hand position - Brake and shifter lever position lines for spot-on control set-up - 40mm of cut marks on each side for easy width customization - OCLV Carbon construction is the benchmark for durability and light weight

The Burgtec Ride Wide Alloy DH Handlebars, built for the toughest and most demanding tracks on the planet - 800mm width - 9 degree backsweep - 5 degree upsweep - Suggested cut down marks - Weight: 340g

The Ride Wide Alloy Enduro Handlebars are the original and best wide bar. It's the little differences that make it one of the most comfortable bars in its class. The backsweep and upsweep help the bar to the ultimate feel once tried always loved. As used by the Santa Cruz Syndicate riders Greg Minnaar, Jackson Goldstone, Nina Hoffman, and Laurie Greenland. - 800mm width - 9 degree backsweep - 5 degree upsweep - Suggested cut down marks - Weight: 300g

As used by the Santa Cruz Syndicate riders Greg Minnaar, Loris Vergier and Luca Shaw. The Ride Wide Carbon DH Handlebars from Burgtec are the ultimate in control. - Uni-Directional Carbon - 800mm width - 9 degree backsweep - 4 degree upsweep - Suggested cut down marks - Weight: 280g

Unmatched comfort and unquestionably superior vibration dampening properties. The Burgtec Ride Wide Carbon Enduro Handlebars is built to take a beating. - Uni-Directional Carbon - 800mm width - 35mm bar clamp - 20mm or 30mm rise - 9 degree backsweep - 5 degree upsweep - Weight: 258g

Made from heat-treated aluminum, tested to Motocross safety standards Marked for custom cut length

Burgtec's first range of signature handlebars developed with, yes you've guessed it! Josh Bryceland. Josh loved the sweep and rise of the Ride Wide Bars but asked us to make him something a bit higher. The Rat isn't one of those guys that's 'crazy' on setup, but he knows what he wants. - 38MM RISE: Back in 2018 Josh's idea was for something more versatile that he could use on all his bikes. After testing various prototypes, he finally narrowed it down to a 38mm rise bar, the perfect sweet spot. The first material thought was Carbon but after getting to ride various Alloy prototypes he just got more comfortable on Alloy. So, the 38mm "Ride High" was born. The same unsurpassed comfort and durability as all of the Ride Wide range, but just a little Higher. - 50MM RISE: It's fair to say high rise bars have taken a back seat over the last decade much in part to the increasing wheel sizes pushing up front ends of bikes and riders trying to match their previous riding positions. After first coming to us a little over 3 years ago and deciding on the 38mm rise bar Josh wanted to quite literally raise the bar once again. We'd previously prototyped the 50mm bar alongside the 38s but at the time just felt they looked out of place. With more riders moving towards 29ers we felt the market just wasn't ready for them. Josh quickly adapted to the 38s but still felt he was running a lot of stack on his bikes. So with more frequency, he was popping in to Burgtec HQ asking if we had any of the 50mm rise bars left. In the end, we ran out of prototype bars, and Rats a very persuasive guy so we just decided to go into production with the 50s. For Josh, he loves how the higher rise allows for more maneuverability as well as getting rid of the excess stack height. Plus, being a taller rider, they keep his weight where he wants it and freely admits "It's easier on my back". The bars are a natural fit for Jump bikes but as Josh and the boys show they are equally at home on bigger travel trail bikes too. - Width: 800mm - Rise: 38mm, 50mm - Available in 35mm clamp only. - Backsweep: 9° - Upsweep: 5° - Weight: 38mm Rise = 346g, 50mm Rise = 391g

- Super wide 800mm Enduro/Freeride/Downhill riser bar - Custom drawn 7000 series alloy provides highest strength to weight of all Chromag bars

- Super wide 800mm Enduro/Freeride/Downhill riser bar - Custom drawn 7000 series alloy provides highest strength to weight of all Chromag bars

- The original Chromag bar - Used from XC to DH, the OSX is Chromag's most versatile option - 31.8mm clamp Specs: - Rise: 25mm - Handlebar Width: 800mm - Stem Clamp Diameter: 31.8mm - Handlebar Material: Aluminum - Upsweep: 5 degrees - Backsweep: 8 degrees