Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

BMX

$35.99
Odyssey JC/PC Pedals are designed with replaceable pedal bodies, pins, and nuts. - No bearings, adjustable bushing tension - Two-piece plastic bodies with replaceable metal pins and CroMoly spindles
$20.95
- 4140 Chromoly - 3 Possible peg positions for longer peg life - 14mm with 3/8-inch adapters included - 4 inches (length) x 1-3/8 inches (outer diameter) - Sold in pairs - 8.75 oz (17.5 oz for a pair)
$24.99
Designed specifically for use with Odyssey's Quartet FRONT or REAR hubs. SPECS - Forged from 7075-T6 aluminum for greater strength and durability - Steel insert prevents guard deformation, prolonging bearing life
$49.99
- Super hardened Cr-Mo/Nylon construction - 40 x 100mm - Special insert fits 3/8" or 14mm axles - Diameter: 40mm - 320g (pair) - Material: Chromoly Core w/Nylon Sleeve - Sold in pairs
$4.99
Unique design with Thermalite for durability. In-moldED Steel insert to eliminate bar punch through. Expands securely with a grub screw to fit tightly on regular, 9, 11, & 13 butt bars. - Expands securely with a grub screw to fit tight - Material: Thermalite - Weight: 1.0-ounces per pair
$22.99
- CNC machined 6061-T6 aluminum chain tensioners - Compatible with 3/8 inch and 10mm axles - Single bolt operation makes tensioning a simple task - Material: 6061AL
$17.99
The Silencer V2 has a lightweight 6061 aluminum core supports the entire sleeve. The sleeve is made from our proprietary Thermalite material and resists cracking and deformation while sliding better than chromoly on most surfaces. The lengthy 4.4" peg ensures you maintain locked into grinds. - Axle: 3/8" with included 10mm adapter - Diameter: 1.6" - Length: 4.4" - Weight: 5.3-ounce each - Sold individually
$5.99
The Graduate sleeve is the replacement sleeve for the Graduate peg that's made from long lasting, fast sliding plastic. - Sold singly
$19.99
This custom 7075-T6 aluminum pre-load bolt design is included with every Odyssey fork. - Fits both a 6mm and 8mm allen key. - Front brake cable thru-way hole for removal without disconnecting brake hardware. - Designed with an easy-cut thread groove if you cut your fork’s steerer tube down.
$18.49
CNC-machined from 6061-T6 alloy, these WeThePeople Drops Bar Caps simply go over the end of your bars and attach with a 2mm grub screw. Weighing next to nothing, there isn't a lighter way to prevent your bars from getting scratched up.
$67.99 - $99.99
A true bmx classic. The Hazard Lite is respected because of its strength, reliability and light weight. Often imitated but never matched in quality or durability. The Hazard Lite is the rim of choice for some of the world’s best riders. - Fully welded joint construction - Directional spoke hole drilling
$69.95
All Box stems are engineered and crafted using our Oversized Technology. As we follow the load paths down the handlebars we have focused our attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. We’ve done this by moving material from low stress areas. This has greatly minimized twist and contributed to responsiveness. As the stem in mated with the handlebars we have contributed to increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: This particular model stem pushes our Oversized Technology to the extreme as it maximizes the shift of material from low stress zones to the Oversized interface. These stems are engineered for the smaller-sized racers. Weight Limit: Meets or exceeds EN Racing 14765 Standard. FEATURES Oversized Stiff Design Oversized Bar Bore Hollow Cro-Mo Clamping Bolts Front-Load Clamp Design Lightweight 3D Cold Forged Design for Superior Strength COMPATIBILITY Box One XS Fork with 1" Steerer Tube Box One XE Fork with 1" Steerer Tube Hex Lab Carbon OS 4.5" 28.6mm Handlebars Hex Lab Carbon OS 6" 28.6mm Handlebars FAQ My handlebars have a 22.2mm Ø stem clamp area, can I use this stem? No, this stem only fits handlebars with 28.6mm Ø stem clamp area. SPECIFICATIONS 40mm 45mm Clamp (Ø) 28.6mm 28.6mm Material 6061-T6 Aluminum 6061-T6 Aluminum Process 3D Cold-Forged 3D Cold-Forged Rise 5° 5° Stack Height 38mm 38mm Steerer Tube 1" 1" Weight 106 grams / 3.7 ounces 115 grams / 3.8 ounces
$22.95 - $35.95
- Super hardened nylon construction - 40mm diameter, 100mm length - Special insert fits 3/8" or 14mm axles - 90g (pair)
$54.99
A total redesign of Odyssey's popular MDS sprocket. With a built-in full guard, this sprocket lives up to its name, helping to protect your chain from anything you can throw at it. Sprocket thickness increases towards the guard area for greater strength. Compatible with all chain widths. - 7075 Aluminum
$24.99
New dust cap design, with Monogram laser etched logo, for a cleaner look to accommodate a taller riding set up with less spacers. Same quality as Odyssey's Pro Headset using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times. FEATURES - High-quality sealed bearings. - Color matched spacers included. - 15mm dust cap. With 3mm, and 2mm spacers - Laser etched Odyssey bearings. SPECS - Campagnolo standard spec. - 1 1/8-inch integrated headset. - 45º tapered bearings - 41.8mm outer diameter (fits 42mm BMX head tubes).
$8.50
The Slim by Four is a BMX-specific brake pad with a symmetrical shape designed for both forwards and backwards braking. A custom inner frame helps to stiffen the pad and prevents excessive braking power from being lost to flex. SPECS - Clear and Gum colored “Soft” compound pads provide extra grip on powder coated rims. - Black “Normal” compound Slim-By-Four pads are the most popular pad choice for most riders.
$29.99
- 4130 chromoly axle pegs with 3 position anti-rotation set screw - Designed for use with 14mm or 3/8" axles (with adapter) - 4130 chromoly offers a durable, long lasting peg with a smooth grind - 3 set screw positions extend the life the of the peg - Axle: 14mm / 3/8" - Diameter: 35mm - Material: Chromoly - Sold in pairs
$19.99
- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers. - Sized and dimensioned specifically for BMX.
$27.95
The Box Two BMX chain's nickel plating adds both corrosion and wear-resistance to your ride. All Box Two BMX chains have solid plates and solid pins to safeguard durability. They are compatible with BMX 3/32" and 1/8" chainrings and cogs which fits most retro-modern 29 inch BMX bikes and smaller bikes Our Most Durable Chain Nickel Plated Protection Includes Nickel Connecting Link Durable Hardened Solid Pins Compatible with BMX 3/32" Chainrings and Cogs Compatible with BMX 1/8" Chainrings and Cogs Box One Single Speed Aluminum Cogs Box One Single Speed Chromoly Cogs Box Two Freewheel Material: Hardened Alloy Steel Finish: Nickel Salt Spray: 30 hours
$13.95 - $14.95
As the name implies, this new version can be easily adjusted to cover 3 different lengths by utilizing the cable’s unique straddle interface connection. This tool-free feature allows the Adjustable Quik Slic Kable to be a one-size-fits-all cable for virtually every braking configuration. FEATURES - Adjustable hanger slot allows upper cable to rotate for optimum alignment. - The integrated hanger and straddle cable creates direct routing to brake arms with no bends or twists to reduce flex. - Linear K-Shield mesh housing offers higher compression rate and lighter weight than standard steel mesh. - All Odyssey Linear cables are offered with the K-Shield housing. - Specially designed and machined Volcano ferrules prevent premature housing blowout. Velcro strap included. SPECS - Housing length: 995mm - Frame requirements: Slotted cable stop and guides. 245mm (+/-3) distance from center brake boss to the front of the cable stop is recommended. - Brake requirements: Open-ended U-brake arms. - Works with most brake levers. - Velcro strap included.
$26.95
Designed using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times. FEATURES - High-quality sealed bearings. - Color matched spacers included. - 10mm, 3mm and 2mm (15mm total) - Laser etched Odyssey bearings. SPECS - Campagnolo standard spec. - 1-1/8 integrated headset. - 45º tapered bearings 41.8mm outer diameter (fits 42mm BMX head tubes).
$22.50
The Odyssey Medium Monolever is a favorite with its familiar feel, smooth edges and variety of handle options. - Fits 7/8" bars, has a hinged bracket, and does not include cable knarps
$13.99 - $19.99
Odyssey Twisted PC pedals-extremely simple, lightweight, inexpensive and famously durable plastic-bodied design.Often duplicated but never replicated. - High-strength plastic composite
$10.99
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable. The Springfield lever is easy to install and remove without having to wrestle grips on and off. An ordinary hinged clamp can be bulky and expensive so a new clamping design made specifically for die-casting was used. This approach keeps the lever reliable and affordable. The lever handle is the same comfortable shape as the proven Monolever Medium blade.
$9.99 - $11.99
The Jake Seeley signature grips feature a gradually increasing rib width design and a tapered core for comfort. - 160mm
$39.95
Box Two Saddles are the first of their kind, featuring a proprietary co-molded nylon shell and carbon fiber Seatpost. Super lightweight and designed specifically for BMX racing, they feature the Box logo molded into the top and have reduced profiles to prevent snagging on pants. FEATURES 6061 Alloy Post Over-molded Plastic Saddle Impact-Resistant Clear Coat Finish Minimum Insert Indicator SPECIFICATIONS Small Large Saddle Material Co-molded Nylon Shell Co-molded Nylon Shell Saddle Dimensions 165mm x 108mm 216mm x 114mm Seatpost Material Aluminum Aluminum Seatpost Diameter (Ø) 22.2mm 27.2mm Seatpost Length 135mm 135mm Weight 164 grams / 5.8 ounces 204 grams / 7.2 ounces
$89.95
Tested extensively by the Dutch National BMX Team, Damien Godet, Kory Cook, and numerous other elite racers, Box Two™ Freewheels combine durability with lightning-fast engagement. They feature nine, super durable pawls and are available in one of three choices -- 16, 17 or 18 teeth. To install, use the Park Tools™ FR-6 or other installation tool designed for single speed freewheels with four notches that are approximately 32mm across measured inside to inside and 40mm outside to outside. 1/8th or 3/32 Chain Compatible ED Black Protection 108 Points of Engagement 9 Pawls Engagement System Heat-Treated Chromoly Material Chromoly Chain 1/8" or 3/32" Hub Thread 1.375 x 24 TPI Engagement 3.3° [108 clicks] Finish Nickel Plate ED Finish Weight [16T] 163 grams / 5.75 ounces Weight [17T] 170 grams / 5.99 ounces Weight [18T] 176 grams / 6.21 ounces
$329.95
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the most critical component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high load. Those muscular shoulders aren’t just for looks, as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: This particular model fork is tailored for larger-sized racers and takes our application of Oversized Technology one step further. It includes a tougher 1-1/8 inch Chromoly steerer tube and stiffer 20mm through-axle cold-forged dropouts. Weight Limit: 115kg (253 lbs) with limitations as per Category 2 of EN 16054:2012 Standard Oversized Technology™ 20mm Through-Axle 1-1/8 Inch Chromoly Steerer Tube Internal Butterfly Steerer Tube and Fork Crown Interface Cold-Forged and Bonded Dropouts Includes Box One™ Stem Lock Includes Box One™ Fork Adapters Note: Use of a star nut voids the warranty for this product. Box Two 1-1/8" Integrated Headset Box One Carbon 45x45 1.1/8" Integrated Headset Box Two Threadless Headset Box Two Headset Spacers Box One Front Load Stem Box One Top Load Stem Box Two Front Load Stem Box Two Top Load Stem Box One Delta Stem Box One Center Clamp Stem Box Two Center Clamp Stem Box Two 20mm Front Hubs 20 Inch 24 Inch Material High Modulus Unidirectional Carbon Fiber Steerer Material Cro-Mo FAQ Are these forks compatible with OS 20 Wheels? No. Due to the larger diameter of the wheel, these will not work. The largest compatible tire is 20 x 1.95. May I use a star nut with this fork? No. You must use the stem lock provided with the fork, or an equivalent expander plug (i.e. Box One Carbon Headset). Use of a star nut is prohibited and voids the warranty for this product. Does this fork fit my frame? To determine compatibility, first examine the head tube of your frame. X5 forks are only compatible with tapered head tubes (see below).
$379.95
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high load. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: This particular model fork pushes our Oversized Technology to the extreme as it includes the 1.5 to 1-1/8 inch tapered 7000 series aluminum steerer tube and stiffer 20mm through-axle cold-forged dropouts. Say good-bye to deflection. Weight Limit: 115kg (253 lbs) with limitations as per Category 2 of EN 16054:2012 Standard Oversized Technology™ 1-1/8 to 1.5 Inch 7000 Series Aluminum Steerer Tube 20mm Through-Axle Internal Butterfly Steerer Tube and Fork Crown Interface Cold-Forged and Bonded Dropouts Includes Box One™ Stem Lock Includes Box One™ Fork Adapters Note: Use of a star nut voids the warranty for this product. 20 Inch 24 Inch Material High Modulus Unidirectional Carbon Fiber Steerer Material 7000 Series Aluminum Finish High Gloss Black Offset 32mm Steerer Tube 1-1/8" - 1.5" Weight 579g/20.4oz, 616g/21.7oz FAQ Are these forks compatible with OS 20 Wheels? No. Due to the larger diameter of the wheel, these will not work. The largest compatible tire is 20 x 1.95
$24.99
The M2 lever works with a single cable or Odyssey's dual cable system. - Includes M2 dual cable, double cable coupler and single cable coupler - Replaceable hardware to eliminate stripping
Page 1 of 4 Next page